View Full Version : Can anyone tell me how to unlock e606
i am looking forward to unlock my e606 but i came to know that there is no serial for that, but u can open it with software connecting via pc.
canany1 post this software.
thx in adv.
its a test point then u can unlock 606 with any nec software not 3g one such as red box furious etc
EURO-SERVICE
05-31-2005, 17:55
Try to download in this place the software for unlock your phone:
http://www.unlockeasy.com/modules.php?name=Downloads&d_op=viewdownload&cid=74
When making the cable, is all that is required is to connect TX, RX and GND from PC serial cable to points on E606 board?
Does power need to be provided?
ics_igrec_zet
06-01-2005, 11:53
Yes connect wires from serial cable to test points, and try to use thin wires because after this you must assemble phone to provide power.
BR, xyz
Yes connect wires from serial cable to test points, and try to use thin wires because after this you must assemble phone to provide power.
BR, xyz
Thanks for quick reply, I was puzzled as some pictures I have seen show a red and black wire also which I presumed was power
Yes connect wires from serial cable to test points, and try to use thin wires because after this you must assemble phone to provide power.
BR, xyz
Some of the cables I have seen have a bulge in them, would there be a voltage convertor in here, or are you absolutely certain I can connect direct from PC serial port to 606 board