PDA

View Full Version : 2 TSM7 without network after unlock with tsmbox

Raklm
06-14-2005, 18:06
I have two tsm7 and after unlock no network found
it is same vers 22 in phone and done with v11 of box
cannot change band in phone

is any reset code for it?

BR
Rak|m
GMX@cool
06-14-2005, 18:12
I have two tsm7 and after unlock no network found
it is same vers 22 in phone and done with v11 of box
cannot change band in phone

is any reset code for it?

BR
Rak|m


Try ##*#9374 + call


Regard
al0342p
06-15-2005, 00:21
Hello Raklm

Tsmbox canīt damage any phone. Check network or maybe this phones have problem with imei block. Our box only read NCK, doesnīt make any flash patch that can damage soft.


Best REgard


al0342p
Raklm
06-16-2005, 09:00
Hello Raklm

Tsmbox canīt damage any phone. Check network or maybe this phones have problem with imei block. Our box only read NCK, doesnīt make any flash patch that can damage soft.


Best REgard


al0342p

not ONLY reading nck in tsm7
is WRITING partial flash in phone maybe

BR
Rak|m
kenichi
06-17-2005, 16:40
Raklm, do you really think you can flash a phone via IRDA?...... Are just AT commands. Maybe no network before unlocking too.
mr_x4you
06-17-2005, 18:57
try to see if phone is not set on 1900, this one is triband
valibuzauro
06-17-2005, 19:02
use other sim card and then put the first card again ;)

best regards
vali
pinheadZ
06-18-2005, 04:09
TSM7 unlocker does not make any flash patch, try with the original SIM card first, maybe the phone IMEI is blacklisted.

Regards.
Raklm
06-18-2005, 11:18
solved
10x to vali :)

BR
Rak|m
Fre3 Crack3r
06-18-2005, 13:52
Great . .

Can U tell us how U slove U pb ? i mean are it H/W pb ?

Regards . . :D
Raklm
06-18-2005, 16:05
is not defective phone

just inserted another sim card like vali said and get signal
then put it back first card and get network also

I dont know why
but is working

BR
Rak|m
Fre3 Crack3r
06-18-2005, 20:32
hehe . . maybe idio lazy mobile :)

Regards . . :D
pinheadZ
06-19-2005, 16:23
All VITEL TSM are veeeeeeeeeeeeeeeeery strange mobiles, 90% of the communication errors I got while stduying them were because mobile just refused to work xD

Maybe the SIM swap trick is to make the phone init the GSM band in the eeprom and then when you enter the second SIM card the GSM band is already initialised.

Regards.