View Full Version : Setting Of Sendo Tool
Aamir_Zia
06-30-2005, 12:25
My Box Now Activated for Sendo after Online Update
Now When i Open Soft JTAG lights are ON
So I plug Cable to JTAG Jack But Phone donot Connects to Software
I Tried on all Jack but Phone is Not connecting :(
Is there is any Special Setting ?
Ready...
Connecting to update server...OK
Update completed
Waiting for ignition...Timeout!
Waiting for ignition...Timeout!
Help me :)
Thanks
Aamir Zia
GSMtricks
06-30-2005, 13:36
Which models? Post please there all steps.
REALTHOMAS
06-30-2005, 18:49
amir u have to do this steps
1 conect box to usb
2 open sendo soft
3 conect cable to jtag slot
4 conect cable to phone
5 click in conect
6 when soft ask u for ignition click in pwr button of phone
7 if give u time out your cable its faulty
Hi
I have problem with unlock Sendo S360. I check the cable and all is OK. When I press power nothing hapened, only timeout:( With Philips 655 I have the same problem. How I can unlock S360 and Philips 655?
WBR
Sakura
GSMtricks
07-01-2005, 13:05
Write here all you steps for Sendo
1. conect BOX to PC
2. start software SEST_v10.exe
3. set model to SND360
4. conect cable to box - JTAG
5. conect phone to cable
6. press Conect
7. when show "Waiting for ignition" press power on the phone
8. software give info: Waiting for ignition...Timeout! and phone powered
I check Sendo P200 and M570 and all is ok. i unlocked this phone without problem. Only S360 can't unlock.
GSMtricks
07-01-2005, 14:53
Post there the sceenshot. I need to see what is the problem
Aamir_Zia
07-01-2005, 16:18
Ok Friends
Phone Connects Now
I have to insert Cable in Socket more deeper
But I am Very DAM angry Rite now
I recieve 50 S330 For Debrand
Offcourse i have old Sendo Dongle Too
So I try to Flash 1 With Multi Box
I select MCU & Click on Update Firmware
Guess What
After Flashing Phone DEAD :mad:
Completely DEAD :mad:
Means Boot is Lost :mad:
Then I Do Rest of my Phone with OLD Sendo Dongle
The Phone damaged by Multi Box Cannot even Read by Sendo Dongle :(
So When Multi Box Team will Lauch a Jtag Feature to Restore The Boot
I have this Phone Waiting to Repair
Regards
Aamir Zia
Aamir_Zia
07-02-2005, 07:51
Where is Multi-Box Team
I want answer
How to Solve my Prob
My Phone is Now no More Connecting to software after flsah with Multi Box. :mad:
GSMtricks
07-02-2005, 10:14
In you picture I see nothing.. What I can do? Write how are you do it?
1. conect BOX to PC
2. start software SEST_v10.exe
3. set model to SND360
4. conect cable to box - JTAG
5. conect phone to cable
6. press Conect
7. when show "Waiting for ignition" press power on the phone
8. software give info: Waiting for ignition...Timeout! and phone powered