Multibox as uni-box [Archive]

Windziarz

06-30-2005, 22:50

I have setup Multibox in coms 3 & 4, with com 3 box is detected with multibox softwares and work OK (beside philips 655), but I can't force to use it as unibox in Com 4.

Doesn't connect with Siemens SWUPS for example, is this function need some special setings?

I have try diferent speeds of transmision.

I'm using WIN98SE

Any advice?

GSMtricks

07-01-2005, 13:01

Use like come 3. Simple

Windziarz

07-01-2005, 13:20

don't work too:(

Only diode flashing and no respone from phone I've checked on alcatels, siemens phones

GSMtricks

07-01-2005, 14:27

In which RG you plug the cable? What you see on LED?

Windziarz

07-01-2005, 14:39

in uni RG 4 example wiswup whant to connect and yellow led blinks but not taking any response from phone

GSMtricks

07-01-2005, 14:55

SO you have wrong cable I think. Check the pinout

Windziarz

07-01-2005, 14:59

Cables are OK because I've tested my old philips cables and workingOK and they have the same pinout like other cables

And these cables are working with my old box

GSMtricks

07-01-2005, 15:51

But maybe you cable not compatobile with Multi-box. Check you com port settings also.

Windziarz

07-01-2005, 16:41

cables are compatible because old philips cable from old box working with multibox so others should also work as they are the part of the same set which I have

GSMtricks

07-01-2005, 16:54

In that case you have a trouble with you settings.

Windziarz

07-02-2005, 07:49

Please explain wihich settings you have on your mind, I'm not a beginner in GSM bisness :) but sorry, I really whant to use it to flash phones with high speed.

I've changed TX and RX buffors in advanced setting, nothing help.

Sorry that I ask so much but if I have some equipment which I paid for it, I want to have it full operational:)

B.R.

Windziarz

GSMtricks

07-02-2005, 10:15

I understand you , but for me in my box all working good without any problem.

Windziarz

07-02-2005, 11:21

OK I will try again with diferent settings

GSMtricks

07-05-2005, 20:13

You problem is fixed or not?

Windziarz

07-05-2005, 22:49

Not yet but tomorow gsminfo promise me to help with this

B.R.

Windziarz

GSMtricks

07-06-2005, 04:29

Oki. and let me know the results. I am also want to help you.

Windziarz

07-11-2005, 10:18

Unfortunetly after few days of trying still not working as unibox:(

Also my friends faced the same problem so I'm not the only one with this prob.

GSMtricks

07-11-2005, 18:00

hm.. tomorrow I`ll be at the factory and check it with phone.

GSMtricks

07-11-2005, 18:39

In which comport is multi-box in your system?

Windziarz

07-11-2005, 18:52

on com 3 and 4

B.R.

GSMtricks

07-11-2005, 20:58

in uni RG 4 example wiswup whant to connect and yellow led blinks but not taking any response from phone
man... I mean wich one? You can see the printed words on the multi-box.
then also tell wich com port you use multi-box?

Windziarz

07-11-2005, 22:33

In my system shows that use Com 3 for multibox and software recognize multibox on com 3, and in system manager there is com4 I asume that is used for uni box

So in system Manager are two ports instaled for multibox 3 and 4

Windziarz

07-12-2005, 12:44

I manage to work it with cracked PBB for SE but with siemens swups not connecting, still working on it