Flas file for GD30

[ringo]

Hi to all
I have a GD30 A14 with "Unauthorised action detected"..I try vicknet repairer v1.1 but no results..Can someone to tell me from where I can get a flash file to use WinModo...Or maybe another solution?

[bone]

Hi ringo,
sollution with viknet should work, just keep
tryin'. First time it took me more than 2wks
to catch the right timing :) but now its
less than 15 minutes :)
ps.: u should have right cable to flash the
phone, but if u really need i can upload
flash file to u somewhere.
br,
bone

Originally posted by ringo:
<STRONG>GD30 A14 with "Unauthorised action detected"..I try vicknet repairer v1.1 but no results..</STRONG>

[cosmo]

Hi to all!
Try this steps:
1- You must first run Viknet to repair phone.When enter Test Mode you will see the IMEI and Serial Number .Erase serial number.If IMEI is corrupt then enter correct IMEI.Then repair.
2- Use Mobile Service GD30 Repair 10 program.Try these ones a lot of times.SOmetimes use Virtualx GD30-GD90 unlocker program.After a lot of trying you will be happy with success.

My best regards to all
cosmo
Originally posted by ringo:
<STRONG>Hi to all
I have a GD30 A14 with "Unauthorised action detected"..I try vicknet repairer v1.1 but no results..Can someone to tell me from where I can get a flash file to use WinModo...Or maybe another solution?</STRONG>

[ARS]

I thing if phone says Unauthorized action detected, you cant flash it. This problem i solve with vinket. After few tryes to repair phone has no valid imei, no serial number and on dysplay anything. Then i run Neos repairer unlocker for GD 30 v 7.2 and phone was alive and unlocked, but IMEI was changed. I dont try to change it.

[Meam]

hi,
with the method that Ars explained, i have repaird many GD30, it works 100% sometimes you don't even need to use neos after you have nothing on the screen you turn the phone off and wait a little and then turn it on again and everything works fine
WBR
Meam

[ringo]

Thanx a lot guyz,
I was try again with vicknet repairer v1.0 and after imei FFFFFF.. and serial yyyyyy.. I used GD30-50_Unlocker-Restorer by NEO and the phone is working now.
Thanx again!

[zbomberman]

hi guys can anybody give a imei changer for the gd30?

i have many but i don't know which one is good.

can anybody mail one.

i need to change imei only.

thanks a lot guys.

i want to change it coz there is an operator do not let phone to work on their system only if they got their imei and this will cost 30 USD to do this action so i can change it to an imei already apid and known by this operator and like that i can skip this step.
loool


thanks in advance guys.

take care

[Meam]

hi Zbomberman,
it's been long time since i had a GD30, i think you can change IMEI with Viknet, i have another prog as well called, GD30 service software, if you need them i can mail them to you right awy
WBR
Meam

[ringo]

Try with this proggy : allpana19.exe from www.Kturn.com (http://www.Kturn.com)
U can find it in directory named "fvilcea".

[arti]

Hi guys,
I have a GD 30 A14. It wasn't power on at the beginning and I repaired it with vicky but now the phone has network failure
- is it hardware problem or
- do I need A14 flash
Thanks

[Marsu168]

hi everybody

I have same prob, i flashing the phone with gad3xa09 & 20 but winmodo say "bad partial crc" to end the flash and on the screen on mobil same thing "bad partial crc"???? why...?????

Thank for help

[czoran]

hello,

can anybody post right pinout for flashing<br />gd30?

do i need some external power?<br />i have tried flashing ver13 to 09 from uspu,<br />but nothing.

also, viknet 1.1 and neo repairer don't work for me.