View Full Version : please help MC60 Blue Screen
hi all
i have MC60 blue screen i did all ways to solve this poblem but it still blue
i worked on it for 3 days and no way out
please help me
regards
sevgigsm
07-19-2005, 00:59
hi all
i have MC60 blue screen i did all ways to solve this poblem but it still blue
i worked on it for 3 days and no way out
please help me
regards
searc
x55 contras tool
sure i tried it
and didn't work
the phone didn't work correctly to use contras tool eventhough i tried it
& didn't work
plz help
thnx
Does it beep ? does it make calls ?
If not flash it ... If yes contrast problem (or hardware) ...
07heaven
07-19-2005, 01:32
If this is a replacement screen then Its the screen, some MC60s take one make of screen, rest take a different type.
The one you have may not be faulty, just the wrong one for the board
Does it beep ? does it make calls ?
If not flash it ... If yes contrast problem (or hardware) ...
yes man
it beeps and dosen't work at all
i tried flashing it with ver. 4,7,10&13
still same status
nothing changes but the time it beeps
b4flashing it was the ordinary beep
i mean beep after 2 seconds
then after flashing it beeps after nearly 10 or 15 seconds
You just need good flashfile ...
Check hxxp://evil-hackers.com/SST .... later
and flash ur phone with flash downloaded from there :)
ROBISH_GSM
07-19-2005, 01:42
FRIST TRY TOUNLOCK UR PHONE IF NOT ... U NEED TO FLASH UR PHONE
1_ BOOT CORE
2_ EPROM
3_ FULL FLASH
4_ UNLOCK AND SAVE MAP .. USE ORIGINAL EMEI
TRY TO COLLECT THE SAME VERSION FOR ALL AND COMBATABLE FREIA
IF U HAVEN'T DOWNLOAD FROM THISLINK BOOT CORE . EPROM.FULL FLASH AND FOLLOW THE STEPS USE FREIA 10
http://s18.yousendit.com/d.aspx?id=1C9ZTQT8WZPB12IBH0MGSHXZ9D
B.R
Robish
FRIST TRY TOUNLOCK UR PHONE IF NOT ... U NEED TO FLASH UR PHONE
1_ BOOT CORE
2_ EPROM
3_ FULL FLASH
4_ UNLOCK AND SAVE MAP .. USE ORIGINAL EMEI
TRY TO COLLECT THE SAME VERSION FOR ALL AND COMBATABLE FREIA
IF U HAVEN'T THEM CONTACT ME
B.R
Robish
ok pretend that i have nothing
may u plz help
try with log and map
bakry...
You need only to write correct EEPROM block for your LCD (Block 5007).
There are two different types of LCD and also two different EEPROM blocks.
m:asafyry
07-21-2005, 20:44
try with sst tool contrast conect-read -write96- all will be ok
mates
i dun think that it's a contrast or even lcd problem
i think the mail problem is with my phone
coz it didn't work correctly to use such stuff like eeprom blocks or contrast tools
the phone opens with fast beep (the ordinary method)
and when i try to repair it with flashing i got it open and still beep but after longer time than it aws
ex: b4 flashing it beeps after 3 seconds
after flashing it beeps after 8 seconds
plz i really need help
P>S
phone info
old version no need 2 test point