View Full Version : A50 Blinking after Crack SST
dannyogolo
07-23-2005, 18:24
Hi all,
I got this sety from another tech, who confessed that he tried unlocking the phone with Crack SST, then it was Wrong Software, Then he did REPAIR, then the phone now blinks only when powered.
I flashed it with Original SST with flash from support area, Repair, Unlock, still same result.
What could be wrong this time ?
Hi all,
I got this sety from another tech, who confessed that he tried unlocking the phone with Crack SST, then it was Wrong Software, Then he did REPAIR, then the phone now blinks only when powered.
I flashed it with Original SST with flash from support area, Repair, Unlock, still same result.
What could be wrong this time ?
Yes the cracked software turns the phones in "Wrong Software".
For repairing this phone with original software please mail to support@sst-gsm.com
Use frreware FREIA, upload EEPROM, set Eeprom imei to ORIGINAL, UNlock and all will be fine.
Best Regards,
karwos
dannyogolo
07-24-2005, 15:05
Use frreware FREIA, upload EEPROM, set Eeprom imei to ORIGINAL, UNlock and all will be fine.
Best Regards,
karwos
Thats the issue, I read a lot about eeprom, but I cant sem to lay my hands on it anywhere.
Who can send me the A50 eeprom bin ???
dannyogolo
07-24-2005, 15:06
@SST-GSM, mail sent
Check mail
use checkbox near the repar button and power on the phone when you are prompted.
make sure the the phone is really A50, not C45 for example that has a simillar PCB
Yes the cracked software turns the phones in "Wrong Software".
For repairing this phone with original software please mail to support@sst-gsm.com
sometimes also original soft turns phone into wrong software :D :D simple is make test point flash ...firmware EEPROM and unlock it again....or only unlock if EEPORM is ok.
sometimes also original soft turns phone into wrong software :D :D simple is make test point flash ...firmware EEPROM and unlock it again....or only unlock if EEPORM is ok.
no need for that but "unlock" and "repair" buttons may fix "Wrong Software" (WS) problem.
Fullflashing or winswup flashing is needed if the phone becomes in a short perion in a "WS" again.
The problem described by our customer here is different from the normal WS as the Software called as "SST cracked by BB-GSM" is a fake soft that makes the phone in "Wrong Software". Then normal unlock with the real SST is enough to fix it.
dannyogolo
07-25-2005, 13:30
Every1 seems to know the solution, but no 1 has the Tools.
Can some1 pls paste the eeprom for A50 here ?
please send us the info displayed when you press "read info" button
If the phone is A50. do the following
1. Upload fullrepair flash file from the support area .
2.Press repair button with repair x5x checkbox if SST displays "Bad EEPROM" in the previous step
If the phone is C45
1.upload C45 flash file selecting A50 phone type
2.press unlock selecting C45 phone type
dannyogolo
07-25-2005, 21:31
Phone repiared, Thanks to SST Team,
Good soft, good team