View Full Version : x70 death
by unlock give it write error and now camera led just blink
InfinitySupport
07-26-2005, 18:19
Hello,
Really, it's very short report. Pls, describe situation more detailed. Also, send Log_X70.txt file to: InfinityHelp at yahoo.com.hk
----------------
Log opened: [7/26/2005] [4:44:46 PM]
App: E:\GSM\GSM OK\INFINITY\panas\X70_v105\X70_v105.exe
Current device: X70
S/N: xxxx:xxxx
Loading, wait...
Ready
Checking data, wait...
Device have to be SWITCHED OFF
Press Power button now...
TestMode Ok
Set Baud...
Set Baud Done
Parameters...
SW Version: GAX70A3232040408
FLASH-ID: 10107E7E
Parameters Done
Check data...
STEP-01 in progress...
Check data Done
Check HW...
FLASH supported[10107E7E]
Check HW Done
Operation...
Working, don't interrupt...
Action-1 Ok
Action-2 Ok
Action-3/1...
Err: write1: 00000804
Err: write1: 00000804
Err: write1: 00000804
Err: write1: 00000804
InfinitySupport
07-27-2005, 13:49
Hello,
It seem like some starnge problem during writing. It can be very bad result, but anyway, pls, describe exactly what is with phone now ?
Can it connect with software now or not ?
phone is not responding . if i pres power camera led blink
InfinitySupport
07-28-2005, 14:45
Hello,
Sorry to say this, but if phone can't connect to our soft or to winmodo this means that phone dead. We have no way to repair it w/o flash chip desoldering and programming with external flash programmer.
i need files for prograning
could be repaired w/o desoldering flash chip
by JTAG ..
WBR
Crew
Hello,
Sorry to say this, but if phone can't connect to our soft or to winmodo this means that phone dead. We have no way to repair it w/o flash chip desoldering and programming with external flash programmer.
Need Info For X70 Jtag I Hawe Jtag Programer.
InfinitySupport
07-28-2005, 17:07
i need files for prograning
Hello,
Contact me by mail for instruction.
luckycool
07-30-2005, 22:33
where can i buy x70 jtag .. and how much it roughly cost ?