View Full Version : Cable Compatibility
The Beast
07-28-2005, 17:20
@Infinity_Support
Hi,
Can you put a list here with the cable need for all the phones that Infinity Box supports?
I only got 2 cable with the box, and I don't know which cable I still need.
Thank you
InfinitySupport
07-29-2005, 08:05
Hello,
1. GD55 (cable for holes under battery)
2. GD67 (old panasonic cable)
3. X70
4. G60, X100, A200, X500 (also possible to use E365 cable)
5. G50, G70, A100, X300, E101, N342i, Philips568: use the same cable (HF 4 pin)
6. X60, X66, X68, X200, X400, A500, C115, C116, C155, C156, V171: use the same cable (HF 3 pin). (the same as T190, T191)
7. CFX65: ordinary x5x, x6x siemens cable
8. VK207, VK530
9. S288, S688, S788
10. S1180C, S1120, V09, V10
11. ST55, ST60
The Beast
07-29-2005, 15:47
Thank you InfinitySupport!!!
bentys2000
09-18-2005, 11:52
please infinity support can you give me pinout for S1180C, S1120, V09, V10
also for panasonic A210 what cable must'i use...
br
Kashif Khan
09-18-2005, 17:25
Hi infinity support , i m using G50 cable for unlock x300 when infinity demand press power on , i pressed power on button appear message connecting phone and error boot failed what i do with it help me plz .
BR
Kashif Khan
bentys2000
09-18-2005, 17:43
maybe bootarea is damaged...so you need jtag or desolde flash chip and program it with labtool
br
InfinitySupport
09-19-2005, 12:58
please infinity support can you give me pinout for S1180C, S1120, V09, V10
also for panasonic A210 what cable must'i use...
br
Hi,
S1180C, S1120, V09, V10: Check "Documentation" folder in the "S1180C" software.
A210: use the same cable like for G50.
InfinitySupport
09-19-2005, 13:01
Hi infinity support , i m using G50 cable for unlock x300 when infinity demand press power on , i pressed power on button appear message connecting phone and error boot failed what i do with it help me plz .
BR
Kashif Khan
Hi,
It's for sure cable/communication problem.
Check your cable, check COM port selection.
Also, pls, check messages about X300 in the FAQ thread. It can be that you need to cut connector rubber around metal pin.
bentys2000
09-20-2005, 09:45
thank you very much
br
bentys2000
09-23-2005, 10:13
to infinity !!!
you say that i can unlock SC3 with infinity dongle !!!!
how to do it and what cable must i use ...
*** bless
InfinitySupport
09-26-2005, 10:15
to infinity !!!
you say that i can unlock SC3 with infinity dongle !!!!
how to do it and what cable must i use ...
*** bless
Hi,
In fact, we never sad that we have unlock solution for SC3 now. We have made flashing support only.
Unlock can be added too, but we need to get some readed locked files.
If you have locked SC3 on hands, please, read flash from it and send to:
InfinityHelp@yahoo.com.hk
We will check readed flash and will try to add unlock for SC3 ASAP.
Cable: the same cable like for G50/A100/X300
please pinout of infinity usb serial Box
InfinitySupport
10-01-2005, 22:53
Hi,
I think it's not hard to find this:
http://forum.gsmhosting.com/vbb/showthread.php?t=207207
lutechua
11-07-2005, 21:55
Hi, may I us prolifik cable siemens st60 for flashing st 55? by dead st 55 program righte- can,t find flash-1. what,s wrong?
InfinitySupport
11-07-2005, 22:05
Hi, may I us prolifik cable siemens st60 for flashing st 55? by dead st 55 program righte- can,t find flash-1. what,s wrong?
Hi,
You can use any cable for flashing. It's Ok to use Prolific usb-rs232 converter.
Gulshan_80
11-29-2006, 07:58
please tell me the cable pinout spice s500
InfinitySupport
11-29-2006, 08:01
please tell me the cable pinout spice s500
man... you are another good example of "smart" people who can write but can't read.
READ THIS HOW TO GET PINOUT: http://forum.gsmhosting.com/vbb/showthread.php?t=342807
please vk 200 which cable to unlock help
InfinitySupport
11-29-2006, 19:42
please vk 200 which cable to unlock help
man... you are another good example of "smart" people who can write but can't read.
READ THIS HOW TO GET PINOUT: http://forum.gsmhosting.com/vbb/showthread.php?t=342807
zinoubinabil
11-29-2006, 19:43
please vk 200 which cable to unlock help
he he he unlock vk200 with which tool:D
reset user lock and other things xcept sp unlock
What cable should be used in unlocking motorola w220?
InfinitySupport
12-15-2006, 09:27
What cable should be used in unlocking motorola w220?
x60 hf cable 3 metal pin
PILONCILLO
12-15-2006, 21:28
io think these post must be steacked.very usefull
CellTronix
12-16-2006, 11:48
Hi
i used to use Moto01 v116a and it connects to my phones but after that version doesnot connect to my phones, i even downloaded the new version this morning but cant connect
InfinitySupport
12-16-2006, 18:04
Hi
i used to use Moto01 v116a and it connects to my phones but after that version doesnot connect to my phones, i even downloaded the new version this morning but cant connect
Hello,
To be honest I understand nothin who can connect to what and after what can't connect.
Please, check this: http://forum.gsmhosting.com/vbb/showpost.php?p=2049170&postcount=4
hi,IT when its to aspect the update on vk mobile,i got for the long time vk4000,desperatly awaiting ulock to be released,but all what we got untill now its user code reset...plz work on it,regards
Can you give me the schematics cable for Pantech 300 there is no cables schematics in the support...
Can you give me the schematics cable for Pantech 300 there is no cables schematics in the support...
Check it here (http://pinouts.ru/CellularPhones-P-W/pantech_24p_pinout.shtml)
br
RNC_EBM
GSMNews.net
12-24-2006, 07:54
please tell me the cable pinout spice s500
keyboard top
1.........18
1: Gnd
2: Gnd
13: Tx
14: Rx
18: Gnd
... this is the correct pinnout for Spice S500 ...
OBS. You can connect only 1 GND not all 3 ...
Ps. Infinity Team ... try to correct the mistake on support ;)
I have tested this with 3 Spice S500 phones
InfinitySupport
12-24-2006, 11:15
Are you sure that you count pins from left to right but not from right to left ?
GSMNews.net
12-24-2006, 12:37
... i am shure i counted the pins ok ( from left to right - keyboard + lcd on top )...
your pinnout works if you reverse the order of pins ... 18 - 1 etc ...
i also measured Gnd pins ... and ... should connect only pin 1 to gnd ...
This phone has no USB detect etc ... so no need to put pin 2 in your pinnout to gnd.
Also ... maybe better to put some resistor on Rx ... 1,2k to 5v ... without this interface is eating to much power from phone ... and the display become little dark... not very good lcd power design in phone :-)
JOHN_JAVED
01-12-2007, 20:09
Sir Infinity Is Great But If Any Software Developer Can Make Cable Finder Software Loke For Ufs Crated By Glaxyman It Would Be Very Easy For Newbaby Like Me . Tahnks In Advance
MC Harami
01-17-2007, 19:32
what about cable for alcatel e265??
Hi,
You can use any cable for flashing. It's Ok to use Prolific usb-rs232 converter.
sir i have one panasonic eb-x500 how to solve it which cable can i use pls
InfinitySupport
02-27-2007, 09:32
sir i have one panasonic eb-x500 how to solve it which cable can i use pls
use cable with "G60" mark
:::MACUGSM:::
04-22-2007, 02:00
THAT CABLE USE FOR THE PANTECH AS OF ALL IS COMPATIBLE? :rolleyes::rolleyes: :confused: :confused:
InfinitySupport
04-22-2007, 10:34
THAT CABLE USE FOR THE PANTECH AS OF ALL IS COMPATIBLE? :rolleyes::rolleyes: :confused: :confused:
Hi,
please, see cabes and pinouts description in support area, "manual" folder.
moldovan
04-22-2007, 10:47
Hi,
please, see cabes and pinouts description in support area, "manual" folder.
May You make a little utilite for cable compatable ?
WBE !
InfinitySupport
04-22-2007, 10:55
May You make a little utilite for cable compatable ?
WBE !
Yes, sure I can. Thanks a lot for good idea. Before this "small job" end, please, use useful utilities with names: "winrar" and "notepad".
1. You can use "winrar" to unpack Infinity-Box_cables_pinouts.rar file in Infinity-Box_cables_pinouts folder
2. You can use "notepad" to browse files in Infinity-Box_cables_pinouts folder and see list of models and pinouts.
moldovan
04-22-2007, 14:09
:D I have estimated Your joke.
But I do not use Infinity, accordingly I do not have Infinity-Box_cables_pinouts.rar
I only sell Yours boxes. And often buyers ask me what cables from the complete set are interchangeable.
I should know it to offer them missing cables.
Here the sample of similar really small utility for Nokia.;)
WBR !
InfinitySupport
04-22-2007, 16:29
@moldovan
Thank you very much for your utility
moldovan
04-22-2007, 18:45
It is not my utility.
Thanks it is necessary to tell Galaxy Man.
I have simply shown You an example.
WBR !
Hallo infinity--
which cable have to use for ap 75, e61???
InfinityHelp
04-25-2007, 20:56
Hello!
pinouts for both phones are available on our support area.
KEYBOARD TOP
1.........10
1: Gnd
5: Tx
6: Rx
also there is availible test point pictures
PLease whatflash files do I have to use for my Motorola V171
mr.Dubai
09-10-2007, 05:48
i need full chana cabel sathow can ge any bady hilp