View Full Version : Cable Oh1 And Oh2
abdoulaye
08-03-2005, 13:56
hi
pls help me for unlock alcatel OH2 WHAT CABLE I USE
Windziarz
08-03-2005, 14:37
already posted solder wires to PCB it's not so dificult I think
Ste Houyam Gsm
08-03-2005, 14:43
oh1 not oh2
r voulum suppoted all new philips
Windziarz
08-03-2005, 14:52
oh1 not oh2
r voulum suppoted all new philips
this MultiBox section so don't spam with rvolume!!
abdoulaye
08-03-2005, 16:40
hi
what cable i use
CABLE philips 855 or what pls
I D NOT HAVE CABLE OH2 :( :( :( :( :(
GSMtricks
08-03-2005, 18:12
But we told you - go to support area and you can found there schematic.
abdoulaye
08-04-2005, 11:39
cable OH2 work com1 or multi box pls help
Windziarz
08-04-2005, 12:10
cable OH2 work com1 or multi box pls help
ofcourse it's connected to MultiBox every phone you make with multibox you connect to it
abdoulaye
08-04-2005, 12:38
what rj45 or com1
i need help for OH2 pls
GSMtricks
08-04-2005, 12:52
Man what is the problem? Pinout for Multi-box is in support area.
abdoulaye
08-04-2005, 13:00
i need explain me for pinout
what i need com1 or rs232 or multi box or what cable use for modification pls
pls detail pls
GSMtricks
08-04-2005, 16:52
Man but you use the multi-box so you need a cable for multi-box
abdoulaye
08-04-2005, 17:39
where can find cable OH2 FOR SALES
GSMtricks
08-04-2005, 17:40
www.tele-way.com I think they have it.
abdoulaye
08-04-2005, 18:27
U Have Schema For Cable Oh2
GSMtricks
08-04-2005, 18:29
U Have Schema For Cable Oh2
Man... come on.. go to support area and you will see schematik.. I tell you all the day this. GO TO Support area and you will see the schematic. What is the problem?
abdoulaye
08-04-2005, 18:46
I HAVE PROBLEME TO UNLOCK OH2
1)what port i use in multi box
2)for modification cable what cable i use
3 pls give me detail
GSMtricks
08-05-2005, 12:50
1. Run the software and you will see the blinking leds on RG - so this port you have to use.
2. Make the cables. Pins are in support area.
3. Go to support area (http://www.multi-box.net/support.php).
I tried make cable to unlock OH2 but not succesfull.phone still opene. I have took FOTO what I did and sent to you for check, if my doing wrong please let me knoe,
THANKS
Hello, plz check, if I connect wrong withTx or Rx. and why cant boot phone ?
abdoulaye
08-16-2005, 15:06
thank mr Vansy working
allright, I have tried 3 days untill found solution unlock OH2, if not try cannot found solution. I never forgot say thanks to Mr. GSMtricks , always help me to find all solution with good working program. Only multi-box can unlock alcatel OH1 and OH2.
and what is the solutio, because i have try many time and always phone swicht on after ignition ,,, i dont know if i must add a resistor betwen TX and +5V vcc. Resistor must be 1K5, ,,,i must add it or now ,, and what is the solution for this OH2 :(
GSMtricks
09-09-2005, 17:35
man... pineout is in support area. try and solder. Or you normal cable and TAT mode.
I have many mail ask me how unlock OH1 & OH2, Solution easy just follow pinout in support area and try:
I TESTED UNLOCK OH2 AND OH1 SUCCESFULL by used PHST_AOHST_MltiBOX_v22.exe:
1)SELECT CORRECT MODEL (My phone show Model OH1 but top of imei show OH12S(OH1C) So I choice OH1C )
Example:
ALCATE OH1- ALCATEL OH11S,
ALCATE OH1C- ALCATE LOH12S,
ALCATE OH2- ALCATELOH21S,
2) jUST SELCT TAT MODE AND
3) CLICK CONNECT PRESS POWER ON KEY:
Ready...
Waiting for ignition...OK
Detecting phone version...
Model: ALCATEL OH1C
FW Date: 23/12/2004
HW: CT
FW Version: 0x0233020212030000
IMEI: 354375-00-595260
Dwn info: 14-04022330-46
Perso ID: OH12S-1ASFFR1
3DS ID: 3DS10526AAAM
SIM Lock status:
NCK : 0277069142 - CLOSED - F4:FF
NSCK: ******** - OPEN - FF:FF
SPCK: ******** - OPEN - FF:FF
CCK : ******** - OPEN - FF:FF
PCK : ******** - OPEN - FF:FF
Phone Lang.Pack: 0046 : G01ItalianSp
Ready...
Setting SIM Lock data...OK
Ready...
I hope all clear
GSMtricks
09-14-2005, 08:27
I have many mail ask me how unlock OH1 & OH2, Solution easy just follow pinout in support area and try:
I TESTED UNLOCK OH2 AND OH1 SUCCESFULL by used PHST_AOHST_MltiBOX_v22.exe:
1)SELECT CORRECT MODEL (My phone show Model OH1 but top of imei show OH12S(OH1C) So I choice OH1C )
Example:
ALCATE OH1- ALCATEL OH11S,
ALCATE OH1C- ALCATE LOH12S,
ALCATE OH2- ALCATELOH21S,
2) jUST SELCT TAT MODE AND
3) CLICK CONNECT PRESS POWER ON KEY:
Ready...
Waiting for ignition...OK
Detecting phone version...
Model: ALCATEL OH1C
FW Date: 23/12/2004
HW: CT
FW Version: 0x0233020212030000
IMEI: 354375-00-595260
Dwn info: 14-04022330-46
Perso ID: OH12S-1ASFFR1
3DS ID: 3DS10526AAAM
SIM Lock status:
NCK : 0277069142 - CLOSED - F4:FF
NSCK: ******** - OPEN - FF:FF
SPCK: ******** - OPEN - FF:FF
CCK : ******** - OPEN - FF:FF
PCK : ******** - OPEN - FF:FF
Phone Lang.Pack: 0046 : G01ItalianSp
Ready...
Setting SIM Lock data...OK
Ready...
I hope all clear
Very Good. I am happy that all is working:cool: