View Full Version : a 70 problem!!!!!!!!!!!!!!!!!!!!
NELU-GSM
08-17-2005, 14:10
i unlock the phone with v6.61 and only siemens be inspired on lcd.
i write a70- repair files and same problem, i need help.
thanks
NELU-GSM
08-17-2005, 15:49
no one have this problem????
i unlock the phone with v6.61 and only siemens be inspired on lcd.
i write a70- repair files and same problem, i need help.
thanks
Hi
Have you checked the phone before unlocking?
If not fully charged battery or bad cable you may receive " Wrong Software " Message. In this case press unlock again.
The problem you have described is strange and such problem should not be caused even if the battery is at low voltage or the cable gives errors in service mode comunication
NELU-GSM
08-18-2005, 07:47
try to update with swup
after cut testpoint not work with winswup!
for me update from switched on phone working with cutted testpoint
NELU-GSM
08-18-2005, 09:52
can you send me your winswup?
Just change baudrate or cable must work with winswup....
Regards
Mackie
can you send me your winswup?
download swup for a70 here
a70_v1401 (http://www.eprom-phones.co.yu/download/a70_140101_service.zip)
a70_140202 (http://www.eprom-phones.co.yu/download/a70_140202_service.zip)
a70_140305 (http://www.eprom-phones.co.yu/download/a70_140305_service.zip)
a70_v140406 (http://www.eprom-phones.co.yu/download/a70_140406_service.zip)
a70_v140507 (http://www.eprom-phones.co.yu/download/a70_140507_service.zip)
a70_v140608 (http://www.eprom-phones.co.yu/download/a70_140608_service.zip)
a70_v140712 (http://www.eprom-phones.co.yu/download/a70_140712_service.zip)
a70_v149109 (http://www.eprom-phones.co.yu/download/a70_149109_service.zip)
a70_v140203 (http://www.eprom-phones.co.yu/download/a70_140203_service.zip)
a70_v140304 (http://www.eprom-phones.co.yu/download/a70_140304_service.zip)
a70_v149013 (http://www.eprom-phones.co.yu/download/a70_149013_service.zip)
a70_v149200 (http://www.eprom-phones.co.yu/download/a70_149200_service.zip)
a70_v149210 (http://www.eprom-phones.co.yu/download/a70_149210_service.zip)
a70_v149611 (http://www.eprom-phones.co.yu/download/a70_149611_service.zip)
a70_v149814 (http://www.eprom-phones.co.yu/download/a70_149814_service.zip)
best regards ;)
NELU-GSM
08-18-2005, 12:23
i have this error, i use cable without ignition
Try without skip...and try other baud and other cable....
Regards
Mackie
NELU-GSM
08-18-2005, 14:30
i*m made it to flash but at 61% prog stop and now phone is not powered on.
i*m made it to flash but at 61% prog stop and now phone is not powered on.
If winswup stopped while flashing that may mean one of the following :
1. Not fully charged battery
2. Bad cable.
3. Bad flash block
Now repairing for this phone will be more difficult.Please wait until the next update.
NELU-GSM
08-19-2005, 08:40
do you know when will be next update sst team?
NELU-GSM
08-20-2005, 12:55
If winswup stopped while flashing that may mean one of the following :
1. Not fully charged battery
2. Bad cable.
3. Bad flash block
Now repairing for this phone will be more difficult.Please wait until the next update.
i powered on the phone again with winswup but first problem still remain.
what should i do?