NEC e313 dead after flash

[vishalmadhvani]

Hi
I flashed my NEC E313 with "ATOM IPLT for USB" The site where I got it from said its for the E313. My phone does not turn on anymore but, it does go in to service mode when I plug in my usb cable.
Please help.
Thanks
Vishal Madhvani

[shahulshaheer]

hi i am also facing same problem in nec e616, anobody have any solu?

[vishalmadhvani]

I have been searching for a solution and I think I have read somewhere that I need to flash it with E228 firmware. Not sure about it though. Is It true???

[vishalmadhvani]

Hi again
been reading around and there are lots of people who say the fone can be revived by flashing with NEC E228 firmware.
Since 2day morning I have been loking for the firmware but cant find it.
Somebody please upload it or atleast email it 2 me and i will upload it.
PM me if you want to email it to me and i'll give you te add to email it 2.
Thanks In advance
Vishal Madhvani

[maver666]

There is a work around if you have the software, I've had this problem with a few NEC phones, if you have the spunlock 1.41, use it to force an unlock on the phone, reset the lang. to English, then use crazzy 5 to repair the IMEI number, it has worked for me on 2 e616, and 1 e228. No guarente but thats what has worked for me :)

[vishalmadhvani]

thanks for the reply but have u got a link for spunlock 1.41

[vishalmadhvani]

maver666 i had spunlock 1.44 which i forced un unlock with and the repaired the imei but the phone does still not work.
the 3 phone u said u fixed how did they die?

[maver666]

They died when trying to unlock woth just the Crazzy software, how did yours die?

[essojay]

Hi
I flashed my NEC E313 with "ATOM IPLT for USB" The site where I got it from said its for the E313. My phone does not turn on anymore but, it does go in to service mode when I plug in my usb cable.
Please help.
Thanks
Vishal Madhvani
you have to look for URAN IPLT for USB -Manufacture Ver.1.0.0 and flash your phone with it...

catch me on sonork and i ll upload it to sonork 100.52927 for you and you can share it..

bR

[Ashwani Gaur]

Hi Mod
as all of us donot use sonork can u pls upload it here (where u got Mod Seat).
It will be a great help 4 all, and pls donot upload it on rAPIDSHARE as it always sucks.

Thanks
wbr

Ashwani Gaur

[vishalmadhvani]

Hi
mine died using ATOM.
I just donwloaded sonork and added you to my list.
How do i download the file do you have to send it to me.
i'll try leave it on the whole 2day
thanks.
will put it up on a server ASAP for every1

[essojay]

Hi
mine died using ATOM.
I just donwloaded sonork and added you to my list.
How do i download the file do you have to send it to me.
i'll try leave it on the whole 2day
thanks.
will put it up on a server ASAP for every1
check sonork...it should be there now..unrar and place it in \program files\nec

bR

[vishalmadhvani]

Hi
Thanks for the file.
The flash is for the NEC E228 and does revive the phone.
Sorry i have taken alot of time to answer.
I have been trying to flash the E313 files using URAN but the phone doesn't work.
Does ne1 have another copy of the E313 flash file, i want to try flash it using uran.
Thanks

[danilo_nop]

I need working flash Uran for 313 too

[essojay]

I need working flash Uran for 313 too
here:

http://rapidshare.de/files/7063100/URAN_IPLT_for_USB_-Manufacture_Ver.1.0.0.rar.html

bR

[zaskar]

u need to flash your phone with e228 flash file and then flash it with e313 flash file.
your phone will work again.
tested many times....

[bad_signal]

ok man there is some topic in the forum can handle this subject
flashing nec and the flashes