View Full Version : snd330 s330
CLIFFORD25502
09-06-2005, 07:50
i have snd330 s330 and i need to write russ into this phone so i connect it to box unlock it write lp and phone not power on after that. so i download 3 different lp from support write SLOWLY them still the same phone conects to soft but not power on. so i download FW&flexes and eeprom i write all them FW+LP+eeprom+FLEX. still the same phone conects but not power on :mad:
any ideas
P.S. @GSMTRICKS i think first of all u ask me to ckeck testpoit pictures on support, next cable, next if box is right connected, next is drivers are instaled correctly, next is latets soft running, next is box updated and is it cotrectly updated, next does i use it soft earlier, next is i ma sure....
SO $ ALL THIS QUEISTITIONS IS ANSWER YYYEEESSS!!!
GSMtricks
09-06-2005, 10:16
P.S. @GSMTRICKS i think first of all u ask me to ckeck testpoit pictures on support, next cable, next if box is right connected, next is drivers are instaled correctly, next is latets soft running, next is box updated and is it cotrectly updated, next does i use it soft earlier, next is i ma sure....
SO $ ALL THIS QUEISTITIONS IS ANSWER YYYEEESSS!!!
It is stupit to post it, man as you can see the most of problem is with this like you wrote. Drivers not installed, box without update and others. I waste too many times some times to solve the problem with box with custumers - they didnt intsall the drivers or have firewalls. That is why the first thing that I need to know is the all corecct or not.
If you dont need any support from me, so..
CLIFFORD25502
09-06-2005, 12:23
and what about :
i have snd330 s330 and i need to write russ into this phone so i connect it to box unlock it write lp and phone not power on after that. so i download 3 different lp from support write SLOWLY them still the same phone conects to soft but not power on. so i download FW&flexes and eeprom i write all them FW+LP+eeprom+FLEX. still the same phone conects but not power on
any ideas
this :
Quote:
Originally Posted by CLIFFORD25502
P.S. @GSMTRICKS i think first of all u ask me to ckeck testpoit pictures on support, next cable, next if box is right connected, next is drivers are instaled correctly, next is latets soft running, next is box updated and is it cotrectly updated, next does i use it soft earlier, next is i ma sure....
SO $ ALL THIS QUEISTITIONS IS ANSWER YYYEEESSS!!!
It is stupit to post it, man as you can see the most of problem is with this like you wrote. Drivers not installed, box without update and others. I waste too many times some times to solve the problem with box with custumers - they didnt intsall the drivers or have firewalls. That is why the first thing that I need to know is the all corecct or not.
If you dont need any support from me, so..
is writen only 4 educatinal purpose because i dont want to uswer this quiestions again and again and again!
CLIFFORD25502
09-06-2005, 14:42
Yes Greatest Support! Pls Tell Me How Much Phones I Must Kill Till U Answer?
GSMtricks
09-06-2005, 16:57
How I can help to you if I dont know what you put into your phone.
CLIFFORD25502
09-07-2005, 07:34
man dont be funny if u can read on english i can write on russian! if u DONT KNOW HOW TO HELP just say IT! what u want file size or date of creation or what i have now dead phone what shall i do and whot u need else to know?
GSMtricks
09-19-2005, 18:08
man dont be funny if u can read on english i can write on russian! if u DONT KNOW HOW TO HELP just say IT! what u want file size or date of creation or what i have now dead phone what shall i do and whot u need else to know?
So did you solve your problem?
CLIFFORD25502
09-20-2005, 07:31
no still not powering phone it still conect to box flashed after that still no power on. i download all flashes and flexes from support and try all them i think i should buy this phone :(
GSMtricks
09-20-2005, 09:59
Did you try to read info after flashing?
CLIFFORD25502
09-22-2005, 08:53
read info? what u mean? phone still conects 2 soft.
GSMtricks
09-22-2005, 10:29
read info? what u mean? phone still conects 2 soft.
I have same problem now with this phone. Wait for solutions please.
CLIFFORD25502
09-23-2005, 10:25
how long its customer phone i shall buy it :( how 2 check whot phones can be flashed and what cannot? its not good buisnes to make dead phones!
GSMtricks
09-23-2005, 13:22
how long its customer phone i shall buy it :( how 2 check whot phones can be flashed and what cannot? its not good buisnes to make dead phones!
Now I have a problem with some s330.
But I working under it.
Hi
i have similar problem
phone has ver 14ag03 and i want to flash russian
russian flash on support is only for 14ag04 version
so:
1. When write main, lp (with or w/o flexing) ver 14ag04 - phone dead
i can flash again but phone still dont power
2.When write main, lp ver 14ag04 - phone alive again
so symple question:
does exist possibility to make this phone with russian lang?
if yes please explain how to do it
p.s. box updated, cable works, flashes checked, .. etc
@GsmTricks
please put your attention here
i dont want create new topic with same content
GSMtricks
02-22-2008, 17:00
Is good to check support before ask same: http://www.multi-box.net/faq_article.php?article=66
All steps writteh here already
1. your link is for S300, with S300 i never havent problem before, but i ask for S330!!!!!!!!(read topics name too: SND330 S330)
2. i know all steps for write language in Sendo, believe me i used Delok sw since Delok Sendo dongle, so dont teach me so brute! sometimes for some model old Delok sw works better then Multibox, but not in my case.
3. If your sw dont work correctly with downgrade SND330 v14ag04 - so tell me, but not play futball with my situation. I need return phone to customer tomorrow and just want make language operation, not disturb you, And if you are so busy so dont answer even on ICQ (im asked very correctly!) why you are here?.
4. Before we had discussion about Z107V, remember? what now i did wrong?
GSMtricks
02-22-2008, 18:51
1. your link is for S300, with S300 i never havent problem before, but i ask for S330!!!!!!!!(read topics name too: SND330 S330)
2. i know all steps for write language in Sendo, believe me i used Delok sw since Delok Sendo dongle, so dont teach me so brute! sometimes for some model old Delok sw works better then Multibox, but not in my case.
3. If your sw dont work correctly with downgrade SND330 v14ag04 - so tell me, but not play futball with my situation. I need return phone to customer tomorrow and just want make language operation, not disturb you, And if you are so busy so dont answer even on ICQ (im asked very correctly!) why you are here?.
4. Before we had discussion about Z107V, remember? what now i did wrong?
man flash your phone and enjoy. No need to tell me how smart you are. I gived a link to you already. It doeant matter which phone you have. Is same for all Sendo. If your version is different - flash FW, LP, CP + eeprom, than flex it. Easy. Already written all this in support docs.
My ICQ is for privat use. Did you see any info at www.multi-box.net that this is support ICQ? No. So
it very correctly to erase my messages, you can do it better than help me
GSMtricks
02-23-2008, 21:35
it very correctly to erase my messages, you can do it better than help me
Stop talking about me always. You asked already - so wait untill somebody will answer. Don't attack me always. :mad: