View Full Version : A70 full flashing and repair solution?
@SST You wrote here for about 10 day's that solution will be in next update, but untill now nothing new about these prob, so pl's a litle more information how things going on( I have a few pc's to repair and for now I can just look at these phones).
Cheers
if you know start offsets may-be i can try to help you-but this is new product and must be experimented before solution:(
if you know start offsets may-be i can try to help you-but this is new product and must be experimented before solution:(
that I don't undarstan what are You saying with these, so pl's a litle explanation.
Cheers
that I don't undarstan what are You saying with these, so pl's a litle explanation.
Cheers
PM me- I allredy have solution to revive this headsets:)
..U have PM since yesterday, pl's check and give me advice about these problem.
@SST team U dont have coment's at all about "coming soon" A70 repair and full flash option?
Cheers
@ppl
And solutionis? I sent to you PM, Email ICQ :)
A70 killed by Martech.
..Martech can't fix the prob? Martech actualy make prob on Your phone during unlock?
What fuc...g phone....I think @ppl You have HAMER solution for these phones, right?
Cheers
..Martech can't fix the prob? Martech actualy make prob on Your phone during unlock?
What fuc...g phone....I think @ppl You have HAMER solution for these phones, right?
Cheers
You don`t want my help? OK have no problems :D
...I asked for help, right? So why You think I don't wona help? I'm just saying these are fu...d phone, nothing more, and HAMER solution is wery popular at these day's, so no hard filings? :cool:
Any way, if You want- HELP me, if don't wont to help...OK, I can live with it.
Cheers :D
..Martech can't fix the prob? Martech actualy make prob on Your phone during unlock?
What fuc...g phone....I think @ppl You have HAMER solution for these phones, right?
Cheers
Yes, on some phones Marech cant repair IMEI, after writing correct
one ... So, maybe that is bug, but for now is proved that some A70
phones can be killed by Martech ...
@SST You wrote here for about 10 day's that solution will be in next update, but untill now nothing new about these prob, so pl's a litle more information how things going on( I have a few pc's to repair and for now I can just look at these phones).
Cheers
Our version with support of A70 fulflashing and also M75 , C75 support was uploaded yesterday night at our support section. we shall release another new update soon.
Cool....nice update...... :cool:
Regards
Mackie
..@SST, good job, and I now have deferent prob-I don't have now another working A70 to read full flash, so if somebody have it, pl's let me now.
Thank's in advice.
DeDaMrAz
09-09-2005, 20:41
@hallo...
...you are not asking in the right place my friend :)
Will be done tommorow! Contact me on the ICQ!
P.S.I don`t work around the clock :p
..@SST, good job, and I now have deferent prob-I don't have now another working A70 to read full flash, so if somebody have it, pl's let me now.
Thank's in advice.
Some files are uploaded in the support area.
All language files for A70 v14 will be uploaded today.
@dedamraz
I did not want to bothering You, anyway Thank's and cheers.
@SST
Now You are talking! Keeped good work. Cheers
@sst any sollution for this problem? my phone freeze at start up and after writing full flash now the light just blink and go off please give update for this thanks
@ADD-GSM
hi with wich version have you flash
i have the same problem
unfortunatly i did not check i tought sst support all version
CLIFFORD25502
10-04-2005, 11:51
i have a70 originaly ver13 used sst 6/73 i flashed full ver 14 before i do backup. now have wrong software. beckup not help now it only bzzz. what shell i do?
i have a70 originaly ver13 used sst 6/73 i flashed full ver 14 before i do backup. now have wrong software. beckup not help now it only bzzz. what shell i do?
Please use fast language flashing instead of fullflashing
email to support@sst-gsm.com to resolve your problem
microtel
10-06-2005, 19:42
I had a same problem too, please send me a solution too mr SST-GSM rindroland@yahoo.com
THX!
I had a same problem too, please send me a solution too mr SST-GSM rindroland@yahoo.com
THX!
You should backup at least eeprom before flashing fullflash.
Always use fast language flashing for language change instead of fullflashing.
We shall upload also some new files soon.
CLIFFORD25502
10-07-2005, 07:50
but what if phone is 13ver? or is dead? u mean that a70 is hard to clone? i have backup full flash but it not help may be flashing bug exist?
CLIFFORD25502
10-07-2005, 09:08
0001227E (AMD) it have this flash tipe after flashing whis 6.74 just blinking
I'll post once again
Please instead of fullflashing use language flashing only.
If you plan to fullflash backup the eeprom at least.
@CLIFFORD25502
we will try to find and send you the repair file you can flash and repair your phone. we have already received your e-mail at owr support mailbox
microtel
10-07-2005, 12:41
Help me too sst gsm, what i have to post to your support? readed wrong flash file?
Sorry for my english.
CLIFFORD25502
10-07-2005, 12:45
thx 4 quik answering ;) sst is the best!
microtel
10-07-2005, 12:52
clifford25502 did you solve your problem a70 blinking?
Help me too sst gsm, what i have to post to your support? readed wrong flash file?
Sorry for my english.
We shall upload files to resolve your problem when we have such files or such phones for test.
You can make backup if you have another phone from the same qty too.
My advice is to upload fullflash to A70 phone if only the phone is dead .
If you want to change language please use language files instead
microtel
10-07-2005, 16:55
Here is the solution for a 70 blinking.
Use SST 6.74 baudrate 115200
1. read fullflash from good a70 v13
2. read eeprom
3. read Flash block from 000000 to 020000
4. write full flash to a dead a70 (blinking)
5. write eeprom
6. write flash block
7. you have got WRONG SOFTWARE
8. Than Click REPAIR
9. You SOLVED THE PROBLEM I TESTED 100%
Here is the solution for a 70 blinking.
Use SST 6.74 baudrate 115200
1. read fullflash from good a70 v13
2. read eeprom
3. read Flash block from 000000 to 020000
4. write full flash to a dead a70 (blinking)
5. write eeprom
6. write flash block
7. you have got WRONG SOFTWARE
8. Than Click REPAIR
9. You SOLVED THE PROBLEM I TESTED 100%
is this sollution also for a70 frezing at startup? i try ur sollution on a70 frezing and now my phone is dead
microtel
10-08-2005, 10:14
my phone was blinking, winswup killed my phone.
Try again!
CLIFFORD25502
10-08-2005, 10:25
frezzing is hardware failure it mean that u cut 2 deep so u need to repair phone hardware
CLIFFORD25502
10-08-2005, 10:31
can u send me flash and eeprom block?
Nenadpin
10-08-2005, 12:41
Hello,
I also had two a70 that were dead after flashing. I've solved the problem with sst ver 6.73. I've used one good a70 and read flash blocks start 000000
end 800000. After that, i've flashed obtained flash file (8MB long) to dead a70. Just use repair option after flashing. Works for me on both phones.
Hello,
I also had two a70 that were dead after flashing. I've solved the problem with sst ver 6.73. I've used one good a70 and read flash blocks start 000000
end 800000. After that, i've flashed obtained flash file (8MB long) to dead a70. Just use repair option after flashing. Works for me on both phones.
You could use read flash function insted of reading flash block.
Here is the solution for a 70 blinking.
Use SST 6.74 baudrate 115200
1. read fullflash from good a70 v13
2. read eeprom
3. read Flash block from 000000 to 020000
4. write full flash to a dead a70 (blinking)
5. write eeprom
6. write flash block
7. you have got WRONG SOFTWARE
8. Than Click REPAIR
9. You SOLVED THE PROBLEM I TESTED 100%
When you write a full flash or an eeprom to a phone there is a danger that it will not switch on.
thats why we recomend writing of language flashes instead.
A70 language flashes can be downloaded from our language file section.
The whole above procedure can be shorten only to this "5. write eeprom" when the eeprom file is A70_EEPROM_type1.bin or A70_EEPROM_type2.bin newly uploaded in our support area.
CLIFFORD25502
10-10-2005, 18:06
mobserv@email.cv.ua thx in advance!
CLIFFORD25502
10-11-2005, 13:17
thx 2 tst problem solved!