C62 flashing

[janos6662000]

I tried to flash a Siemens C62 phone.
I used the following instructions:

Siemens C62 Flash tool


Installation:
1. Install “flash_programmer_for_siemens_setup.exe”
2. Copy “Hd0503-058-m” and “Hd0503-067-m” into “C:\Program Files\microcell\Flash Programmer” folder.
3. Install “PL-2303 Driver Installer.exe”


Settings:
1. Select Options -> Settings ->C62
2. Set Baud rate to 460800 bit/s
3. Select Root folder for software releases
4. Choose Software release
5. Choose Language package
6. Choose Customization package

Phone flashing process
1. Switch OFF the phone
2. Plug-in flashing cable
3. Press Flash button
4. Press shortly power button

Program detects correctly the phone, reads details, but i cannot start flashing process.
I tried both serial and USB cables. Is there a special cable? I repeat: program reads the phone.

[flasher_34]

Yes there is a speacial cable for C62
you can find it in attachment file
pay attention +12V is external power to Pin 9, don't put more than +12v and don't forget the diode 1N4148
this cable works perfectly , i already tried it , if you have any question i'm here to help you
good luck friend

[janos6662000]

I don't have a powered cable.
I modified a C55 cable, i shorted pin 3-5 and pin 4-7, i applied power (12V, 50 mA) through a 1N4148 diode, but flashing still doesn't start.
Does it have to be a powered cable?

[ion4ev]

Hello,
I have the cable from the schematic, but with flash programmer i get:

Waiting phone restart...
Uploading flash algorithm...
Flashing failed. The phone is not responding to load header command.

I tried several phones, but no joy:(

Any ideas?

[meneleo]

hi.i have tried to install flash programmer version 2.71 and 2.83 but everytime i open the program it says:
there are no software releases available in D:\program files\microcell\flash programmer
i have tried different instruction that i have red in the forum but it always the same.
what i am missing here?
any suggestion please.
brgds
meneleo

[flasher_34]

I already faced the same problem meneleo and soleved it
try to check if the folder contains the flash is like this : HD0503-083-M
and no subdirectories except : Flash , cust , language
and the flash's file name is like this : HD0503-083-001-M.SSW
if not rename the directory and flash file
if your problem persist , i'll give you an other solution
Good luck

and in the same time I faced the same problem of non flashing , it displays phone non responding to load header command, but i'm trying to find the solution, when it'll be done i'll give it to you,
good luck for all

[wichaigul]

pls give me the programs

[meneleo]

hi. ihave tried as per your instruction but still the same
anymore advice please
thanks
brgds
meneleo

I already faced the same problem meneleo and soleved it
try to check if the folder contains the flash is like this : HD0503-083-M
and no subdirectories except : Flash , cust , language
and the flash's file name is like this : HD0503-083-001-M.SSW
if not rename the directory and flash file
if your problem persist , i'll give you an other solution
Good luck

and in the same time I faced the same problem of non flashing , it displays phone non responding to load header command, but i'm trying to find the solution, when it'll be done i'll give it to you,
good luck for all

[flasher_34]

don't waste time , here is a good link to download different versions of C62 and it's 100% tested
http://c62.siemensgsm.ru/soft/index.html
but don't rename anything it's perfect
just check the contains of directory per exemple:
V28 it contains (hd0503-097-m\hd0503-097-m\HD0503-097-M)
so pay attention to cut only the last directory HD0503-097-M contains (Flash, Cust, Lang) and paste it directly in directory C:\Program Files\microcell\Flash Programmer
look at the pic and you'll understand more
good luck friend

[meneleo]

hi.thanks for the link.i have already downloaded and the software is working now.i use the cable with 12 volts supply in pin 9.but this is what i get when i press flash and power button.

Flashing failed.
Detecting HW version failed.

could there be some problem in the hardware?
brgds
meneleo


don't waste time , here is a good link to download different versions of C62 and it's 100% tested
http://c62.siemensgsm.ru/soft/index.html
but don't rename anything it's perfect
just check the contains of directory per exemple:
V28 it contains (hd0503-097-m\hd0503-097-m\HD0503-097-M)
so pay attention to cut only the last directory HD0503-097-M contains (Flash, Cust, Lang) and paste it directly in directory C:\Program Files\microcell\Flash Programmer
look at the pic and you'll understand more
good luck friend

[poubapub]

With the flash programmer, can I connect directly the PC COM1 port to the phone with the cable or do I need a "Unibox" in between ?

[FredAmexis]

if you have the right cable you can flash it without the box

good luck!

[tattoum]

hello all

my cable is able to read log with logger and codes with griffin, but when i want to flash the phone i get this message, please help thx
when i changed config file to 1 or 3 it is error code 6
if config file is 4 or 2 i get
Initializing...
Uploading flash algorithm...
Waiting phone restart...
Uploading flash algorithm...
Reading information from phone...
Loading software file...
Software file 'HD0503-097-001-M.ssw' loaded.
Loading language file...
Language file 'HD0503-LNG-097-M-92.SSW' loaded.
Loading customization file...
Customization file 'HD0503-FFS-097-M-109.SSW' loaded.
Flashing software (HD0503-097-001-M.ssw)...
Flashing software failed. The phone is not responding.

[nctrung_vn]

Yes the same me problem .

ploading flash algorithm...
Waiting phone restart...
Uploading flash algorithm...
Reading information from phone...
Flashing failed. Updating phone software to older version is not allowed.


What is problem in Flash phone.

[caputor]

Hi everyone,
this is my first post in this forum.
I have a C62 Siemens and I'd like to build a serial cable for it, but I haven't a good schematic. There's someone that can send me it?

thanks a lot