HARDWARE FAILUER

[Moc]

How can i solve the HARDWARE FAILUER problem in Sagem MC 922 ? Help,pls

10x

[cole]

Reset counter <img src="wink.gif" border="0">

Read older post.We was tallking about it xxxxxx time.

Regards

Cole

[gd93]

don't work on mc922 s6-d2

[DarkGSM]

Did you tried to change field 231 from 05 to 00?<br /> <img src="eek.gif" border="0">

[gd930000]

field 231 is not readable in those phone

[cole]

Hi

Some people still don`t understand.<br />I say read old post.<br />You can reset counter even on s6 etc......

Use some times search engine.Write counter or<br />something like that and klick on find button. We pass 100 times problem "how to reset counter"

If you can`t find solution for your problem with<br />search engine than post topic.

<br />Don`t take this personaly.<br />If there is still some misunderstanding<br />mail me and I will help.OK?

Regards

Cole

[Moc]

Hi Cole

I dont understand about search engine, you can tell me how can i do that ? What i need ? <br /> MORE HELP&lt;PLS

[cole]

Hi MOC

Forget about it. <img src="rolleyes.gif" border="0"> <img src="rolleyes.gif" border="0"> <img src="rolleyes.gif" border="0"> <br />Mail me and I will explane how to reset wrong counter.Just write what version it is and what model.<br />Or you have search "icon" on the top of page.Click on search.<br />Write what you need to search (something what you need to know,word or ...).Click search.Than you will get all posts that is conected with your problem or wort that you put in search engine.<br />Simply you need to reset counter.Then write counter,or reset counter,or hardver failure or....<br />OK???

Regards<br />Cole

[gd93]

hi cole<br />i have read and search for a solution on those mc922 s6-d2 sim locked without sim card.the only solution is by desolderig the eprom and by using pony program or icprog.<br />because the fields 251-252... are protected.

[cole]

Hi

Yes gd93.You right.Unfortunaly you need to read eeprom,change values with some hex editor and than write it back.Than you have 5 tryes again.

Regards

Cole

P.S.<br />You don`t need to desolder eeprom.Just solder wires to eeprom.Be shure to remove battery.