bladecomms
09-23-2005, 22:19
Can anyone advise....?
Problem : Testing this box.... I have repaired imei on K700. After flashing (patched) software, everything is fine until you go into the camera. Giving the following error message:-
Wrong Camera driver version (3.9). Please update camera driver to 3.10 or later.
Reading on the forums someone has suggested that flashing the language as well as the software should fix this problem. I have tried flashing with several different packs inc the following files :-
K700_EU1_R2AY004.SW
K700_EMEA1_R2AY004.FS
The SW works without errors but everytime it tries to flash the language it is giving the following error :-
MCU Ericsson Version: 1.26, and up to date.
SMCU Ericsson Version: 1.58, and up to date.
Output power at Line1 4.11V is in range of: 4.00V ±10.0%
Serial line 1 speed changed to 920kBaud.
Trying to send loader...
OTP IMEI/CID/PAF: 354006-00-648839-X / 29 / 1
Entered test mode.
Phone Color: BROWN.
Phone CID: 36.
Entering flash mode...
First FlashID: 890D; Size: 32 MBytes
OTP IMEI/CID/PAF: 354006-00-648839-X / 29 / 1
Entering explorer mode...
Flashing language file: K700_EMEA1_R2AY004.FS
Terminated with error: 00025630. 0000040D. 00000101. 0000020C. 0002E110. 00025610. 00025740. 00024780
MCU Boot Version: 1.065, and up to date.
SMCU Boot Version: 1.26, and up to date.
Device opened at USB->Universal Box [UBCBTF49]
Got to get this camera working...... Any ideas..?
Best Regards
BladeComm
Problem : Testing this box.... I have repaired imei on K700. After flashing (patched) software, everything is fine until you go into the camera. Giving the following error message:-
Wrong Camera driver version (3.9). Please update camera driver to 3.10 or later.
Reading on the forums someone has suggested that flashing the language as well as the software should fix this problem. I have tried flashing with several different packs inc the following files :-
K700_EU1_R2AY004.SW
K700_EMEA1_R2AY004.FS
The SW works without errors but everytime it tries to flash the language it is giving the following error :-
MCU Ericsson Version: 1.26, and up to date.
SMCU Ericsson Version: 1.58, and up to date.
Output power at Line1 4.11V is in range of: 4.00V ±10.0%
Serial line 1 speed changed to 920kBaud.
Trying to send loader...
OTP IMEI/CID/PAF: 354006-00-648839-X / 29 / 1
Entered test mode.
Phone Color: BROWN.
Phone CID: 36.
Entering flash mode...
First FlashID: 890D; Size: 32 MBytes
OTP IMEI/CID/PAF: 354006-00-648839-X / 29 / 1
Entering explorer mode...
Flashing language file: K700_EMEA1_R2AY004.FS
Terminated with error: 00025630. 0000040D. 00000101. 0000020C. 0002E110. 00025610. 00025740. 00024780
MCU Boot Version: 1.065, and up to date.
SMCU Boot Version: 1.26, and up to date.
Device opened at USB->Universal Box [UBCBTF49]
Got to get this camera working...... Any ideas..?
Best Regards
BladeComm