View Full Version : Clip Not Found
Have installed updater and clip reader on 2 separate pc both pick up prolific com ie com 4 on 1 pc and com 45 on other pc but unable to read clip always clip not found
andesfong
09-24-2005, 19:22
I've the same problem . And any one have the software of Astro Clip. I don't have it. The support site is nothing to download. I also sent email to astro team, but no reply. I feel someone treaded me.
AstroTeam
09-24-2005, 22:44
Colin:
Have you installed drivers and is it set to Clip or Box?
Please check in device manager under ''Ports'', if there is any device connected.
If not, make sure that you have installed the drivers correctly.
andesfong:
Have you downloaded the ''Firmware updater & Serial-number reader''?
If not, download it here (http://www.astro-clip.net/Astro/AstroUpdater.exe) and install it.
NOTE!
To connect your clip to the PC, press unlock button and hold it in few seconds until LED goes green and after this you will be able to update your firmware clip or read your serial-number.
andesfong
09-25-2005, 08:58
Do you have any user guide for Astro Clip, and put more flash file to the support area
CompleteFone
09-25-2005, 12:55
Colin: Ring me if you are still having problems, but make sure switch at the back is in Box mode, connect it to the pc and before you press read data hold the unlock button down until the right hand side light is on (green i think?). Then read the data of the clip and it should find it assuming all drivers are installed correctly.
BR
Sha
Colin: Ring me if you are still having problems, but make sure switch at the back is in Box mode, connect it to the pc and before you press read data hold the unlock button down until the right hand side light is on (green i think?). Then read the data of the clip and it should find it assuming all drivers are installed correctly.
BR
Sha
Hi Sha thanks for info reading clip ok now :)
e_mobile
10-12-2005, 08:21
i try test mode in my box,but still clip not found
I will try to create a guide in some hours, some init guide until I will get the complete knowledge of this great box...
Believe me if I tell you that this is better than USb-Smart in speed flashing and unlocking and it's one of the best tools for Samsung...More surprise will come for sure
BR
e_mobile
10-14-2005, 10:14
some computer can't read clip info,i try few computer just one computer can read clip info only.
AstroTeam
10-14-2005, 22:36
@e_mobile:
Try to uninstall the drivers manually via ''Device manager'', and then reinstall it from setup available on support site.
If problem resist, don't hesitate to contact me by PM.
Hi.
I need drivers to Astro-Clip. I can't find it on support.
Please help me.
Regards.
AstroTeam
01-31-2006, 23:09
Hi.
I need drivers to Astro-Clip. I can't find it on support.
Please help me.
Regards.
You may download it from this link: http://www.astro-clip.net/Astro/Astro-Drivers.exe
great thanks.
How can I activate AstroClip?? AstroUpdater generated some file xxxxx.sam and need *.actv . Astro Manager want name and serial number (he give me my machine numer).
regards
AstroTeam
02-01-2006, 17:47
@bosseq:
If you have the possibility to reach me via the online messagning services, you may contact me on ICQ or MSN, and I'll solve your problem right away.