V802SE Problem

[Sweden Mobile]

Hi Guys!

I've got a V802SE Japan from a customer!

Someone before had upgrade this phone to him, but doesn't work correct, so he sent to me.

I have some problem now. When I Flash the phone to complete it never start up.

I flash it with Cruiser, I revive it, but it hang when start the "Please Wait" Screen.

I went back to Setool to Complete the phone, but now the phone is DEAD!

I tried to Reflash the phone with V802SE files. an I change the CID to Red 29, But not help!

Check the Setool Operation:

GUI v0.9137293/UNI
standalone version engaged.
Card serial:00003403
Loaded 49 flash descriptors
Open COM port OK
Elapsed:30 secs.
Open COM port OK
Elapsed:27 secs.
Open COM port OK
Elapsed:34 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:36
PHONE IS RED RETAIL PRODUCT
Speed:115200
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:13 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:36
PHONE IS RED RETAIL PRODUCT
Speed:115200
OTP status:0 locked:1 CID:29 PAF:1 IMEI:35488500361382 CERT:RED
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:36
PHONE IS BROWN
Speed:115200
OTP status:0 locked:1 CID:29 PAF:1 IMEI:35488500361382 CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Switching to USB...
Phone stays at current interface.
Flashing MAIN firmware:C:\Documents and Settings\Thamer Kafafi\Skrivbord\V802 Jap\v800R1J_jp_main[1].cry\v800R1J_jp_main.cry
CURRENT FLASH FILE CID:29
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
Send subblock NAK
Elapsed:80 secs.
RECOVERY MODE STARTED
Open COM port OK
Recovery:041213 1451 MATCXC1325413_CERTLOADER R3S
Fetching phone data from OTP
OTP status:0 locked:1 CID:29 PAF:1 IMEI:35488500361382 CERT:RED
Recovery succefull. Reflash phone now
Elapsed:18 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:29
PHONE IS RED RETAIL PRODUCT
Speed:115200
OTP status:0 locked:1 CID:29 PAF:1 IMEI:35488500361382 CERT:RED
llbug: trashed answer.
Elapsed:16 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:29
PHONE IS RED RETAIL PRODUCT
Speed:115200
OTP status:0 locked:1 CID:29 PAF:1 IMEI:35488500361382 CERT:RED
llbug: trashed answer.
Elapsed:41 secs.
Open COM port OK
ChipID:0000,EMP protocol:0000
Elapsed:34 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:29
PHONE IS RED RETAIL PRODUCT
Speed:115200
err: 00
loader payload not accepted
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:18 secs.
RECOVERY MODE STARTED
Open COM port OK
Recovery:041213 1451 MATCXC1325413_CERTLOADER R3S
Fetching phone data from OTP
OTP status:0 locked:1 CID:29 PAF:1 IMEI:35488500361382 CERT:RED
Recovery succefull. Reflash phone now
loader refused shutdown, remove and insert battery !
Elapsed:12 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:29
PHONE IS RED RETAIL PRODUCT
Speed:115200
err: 00
loader header not accepted
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:3 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
FLASH CID detected:29
PHONE IS RED RETAIL PRODUCT
Speed:115200
OTP status:0 locked:1 CID:29 PAF:1 IMEI:35488500361382 CERT:RED
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Switching to USB...
Phone stays at current interface.
Flashing MAIN firmware:C:\Documents and Settings\Thamer Kafafi\Skrivbord\V802 Jap\v800R1J_jp_main[1].cry\v800R1J_jp_main.cry
CURRENT FLASH FILE CID:29
SSW uses dynamic hash, dynamic hash len is:291
Will flash 291 blocks...
SSW loading returns:0
Flashing FS image:C:\Documents and Settings\Thamer Kafafi\Skrivbord\V802 Jap\v800R1J_fs[1].jp.cry\v800R1J_fs.jp.cry
CURRENT FLASH FILE CID:29
SSW uses dynamic hash, dynamic hash len is:53
Will flash 53 blocks...
Send subblock NAK
Elapsed:2040 secs.




Any Ideas!

Sweden Mobile

[christal]

would you be kindly share v802se flash file... i have the same prob here. i did it successfully once with cid 29. but this one is cid 36...

[DrMobile]

Try to flash Z800 or V800 flash files..


Br.
A. Wahab.

[christal]

problem solved!!! thank you Dr.Mobile the problem remains on the gdfs.... then flashed to v800 as dr.mobile suggested. all done. by the way... the gdfs were repaired by usb smart. THANK YOU ZULEAAAA.........and your supports.