PDA

View Full Version : E710 Strange Display Problem ! Need Help

goanga
10-17-2005, 11:53
I have this e710 .. with wrong image on the big display ... flex cable and display are 100 % ok .. tested on them with another working PCB ... and they are ok ... the problem is on PCB for sure .. but where ! here picture
chiragp
10-17-2005, 13:00
for easy way u must flash and for hardware change y7620 thnks reply if work
goanga
10-18-2005, 16:35
i also changed today the conector from the pcb .. rehoted audio ic AND AGERE ... also changed all little capacitors near the pcb conector ... NOTHING ! SOMEBODY HAVE ANY IDEEA WHAT COULD BE THE FAULT ????
Sakura
03-16-2006, 19:46
Hello
I have the same problem. anyone have solution for repair this problem?

WBR
Sakura
maya
03-18-2006, 00:38
poste her PCB from E710 i help u to resolved problem
Sakura
03-18-2006, 11:51
This is PCB from Samsung E710.
ANUCHOPRA
03-18-2006, 14:12
hi,
@sakura
look for the bottom connector , maybe water damaged.
wbr,
ANUCHOPRA.:) :) :)
CPUKILLER
03-18-2006, 20:28
I have this e710 .. with wrong image on the big display ... flex cable and display are 100 % ok .. tested on them with another working PCB ... and they are ok ... the problem is on PCB for sure .. but where ! here picture
100% tested for same fault remove lcd jack connector on main board replace with new 1 or check for any shorting in components(capacitors) near the jack and replace
dhruva
10-18-2008, 20:02
I have a e710 which have little weird display its little more whitish in right upper corner as i have posted in the picture what could be the problem? is it Flex or Lcd problem or other problem.