View Full Version : If you not use MT-box cables plese check
SoftMobile
10-21-2005, 13:04
If you buy MT-box for Nokia without cables and get some error when try to flash phone there is some instruction how to make correction:
3230, 6020, 7260 (http://www.softmobile.net/demo/mtbox/6020_cable_error.jpg)
SoftMobile
10-27-2005, 01:24
UTP 10 pin to RJ45/8 pin convertor
mr_rocco
11-03-2005, 22:56
Hi sr its posible same case in 6620 i have this problem
http://forum.gsmhosting.com/vbb/showthread.php?t=245196
thanks
UTP 10 pin to RJ45/8 pin convertor
MT-Box nokia Cable the same GTI cable or ont ?
SoftMobile
11-18-2005, 14:25
MT box Nokia cables has 8 pins on box side
GTI box Nokia cables has 10 pins on box side
Its posible to use GTI cables on MT box without adapter.
I useing GTI cable with MT-box without adater work perfect but still problem with bootloader( Flash folder): Now if I download mtb_nk_setup110.exe installer from support area, I can flash BB5(6680) but if I flash n-gage get error. first I think cable problem but after changed Flash folder boot ok:
Processing File: nem440.3c1
Boot...
ASIC ID: 0082
Auto slow mode
WD2 BT2
w2_2nd.fia
s2_amd_b.fia
Erase[17.71 MB]...
request erase [00000000 to 0000FFFF]
request erase [00010000 to 006FFFFF]
request erase [02000000 to 023FFFFF]
request erase [04000000 to 046B4FFF]
Waiting response for 300 Sec...
ADSP device:
\\?\usb#vid_0451&pid_9000#5&2300ed6&0&2#{958c1e51-94e6-4cb5-93ae-f7073d972797}
OK
Inspect
Supported Proceed....
Empty check: Not Empty
Erasing
Elapsed 10s
Elapsed 10s
Elapsed 10s
Elapsed 10s
Erase OK
sw_dl_init : status o.k.
sw_dl_end : status o.k.
sw_checksum : status o.k.
ADSP Flashing DONE
in 114.81s
Flash[17.91 MB]...in 74.81s
* * Processed file in 204.50 seconds
Processing File: nem440.302
Boot...
ASIC ID: 0082
Auto slow mode
WD2 BT2
w2_2nd.fia
w2_amd.fia
Erase[1.25 MB]...
request erase [00000000 to 0000FFFF]
request erase [04730000 to 047FFFFF]
request erase [00700000 to 0075FFFE]
Waiting response for 300 Sec...in 13.62s
Flash[1.25 MB]...in 4.59s
* * Processed file in 31.27 seconds
* * * Phone flashing done in 3:57 minutes
Pooling mode for full factory set...
V 4.03/26-11-2003/NEM-4 (c) NMP.
IMEI: 351521000065821
Factory Default Settings...Fail
______________________________
Bootloder from support area:
Processing File: nem440.3c1
Boot...
ASIC ID: 0082
Auto slow mode
WD2 BT2
%%%%%%%% ERROR BOOTING:
Ape flashing not completed yet...
..............
SoftMobile
11-19-2005, 11:39
How to solve this problem:
DO NOT install MT box to same directory where is installed other Nokia box (Griffin, GTI, UFS, JAF or any other)
Normaly after instal nokia software always go to:
C:\Program Files\Nokia\Phoenix\MTB_NK.EXE
C:\Program Files\Nokia\Phoenix\phoenix.exe
C:\Program Files\Nokia\Phoenix\Griffin_2.895.exe
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
It is easy and automaticly to pickup Product File from:
C:\Program Files\Nokia\Phoenix\products
but for Prodigy and JAF ready make own folder:
C:\Program Files\ODEON\JAF\flash
C:\Program Files\Prodigy\Flash
and when choice flash(Products) automatic go to:
C:\Program Files\Nokia\Phoenix\products
it not conflicted with C:\Program Files\Nokia\Phoenix\flash
Some poeple use 4 or 5 boxes program together for Nokia One PC
SoftMobile
11-19-2005, 23:34
You can install all boxes on same PC without problems, but problem come when flash loaders is mixed.
Install MT NK box on separate directory and you will see diference.
Try to run Phoenix now.