View Full Version : my MT BOX can't detect even a good phone!
I just got my MT BOX with I-phone sticker label .
In very good looking condition.
but After installation according to the manual.
I can't connect or detect the phone, even a good working one.
what's the problem ? Anyone know please help.
I just got my MT BOX with I-phone sticker label .
In very good looking condition.
but After installation according to the manual.
I can't connect or detect the phone, even a good working one.
what's the problem ? Anyone know please help.
Conect phone to box
power ON > normal or in local mode and try detect
chek cable if using 8 pin cables us MT-box adapter 10 to 8 pin
BR GT
Sorry for my mistake ,I don't see cable adapter.
and now I have this problem:
************************
Phone is in: Local mode
Product Profile file is: apac.pp
Model: NHL-6 ( 6800)
V 5.46/15-12-03/NHL-6 (c) Nokia.
Production serial number SAE928686
Product code 0508228
Module code 0
Basic production code 0505702
Flash code 0
Order number 0
Product specific data
Long production SN 0
MCU SW version V 5.46/15-12-03/NHL-6/(c) Nokia.
HW version 1804
PCI version 0
UEM version 8
UPP version 4384
RFIC version 0105
DSP version HDB18-4.60
LCD version SED15G10
PPM version V 5.46/15-12-03/NHL-6/(c) Nokia./U
IMEI: 350880102438919
Phone is in: Local mode
Imei: 350880102438919
SIM Unlock Successfull
Processing File: nhl6_5105.460
Boot... ASIC ID: FFFF
%%%%%%%% ERROR BOOTING:
What wrong I do for this problem?
When I had this error using other soft, this means cable is not good...Check the cable or wait to Andro's or someone answer. I will have my Mt-Box at the end of the week so I will be able of helping you too
BR
SoftMobile
10-23-2005, 21:53
What wrong I do for this problem?
*********************************************
Boot... ASIC ID: FFFF
%%%%%%%% ERROR BOOTING:
and
Boot... ASIC ID: 0000
%%%%%%%% ERROR BOOTING:
*********************************************
These two errors mean, connection between phone and cable is not OK.
OR cable is not ok
Wow just incredible...First answer that gave without having a device...Hoping Zubair will be online to order him some Mt-Box(maybe become a reseller :) )
BR
another question I would like to know is:
Can MT work perfectly in the same PC which JAF,PBB,TORNADO,GRIFFIN installed?
SoftMobile
10-24-2005, 12:43
Yes of course.
The best way is if you have and have position to install Phoenix.
Just place MTB_NK.exe to c:\program files\nokia\phoenix
Then MTB_NK can read all needed info from Phoenix ini files.
after replace cable adapter, my MT works.
many thanks to softmobile and andro for help.
******************************
Box: CR V 1.001 256
Code: NK V 1.001 1030
SN: 0004b02362
Nokia Unlimited: 59 times started
SonyEricsson Trial: 9 left, each max 15min
Product Profile file is: apac.pp
Processing File: nhl6_5105.460
Boot... ASIC ID: 1120
Configuration Info (9F):
Number of Flashes: 2
ADR 01 : 00EC22F0 000000E4,SectorSize:10
ADR 02 : 00000001 00000000,SectorSize:00
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Erase[13.94 MB]...in 135.25s, Flash[6.18 MB]...in 38.98s
* * Processed file in 181.28 seconds
Low level format...OK
Processing File: nhl65105.46.ucp_hu
Boot... ASIC ID: 1120
Configuration Info (9F):
Number of Flashes: 2
ADR 01 : 00EC22F0 000000E4,SectorSize:10
ADR 02 : 00000001 00000000,SectorSize:00
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Erase[1.94 MB]...in 18.95s, Flash[0.52 MB]...in 4.25s
* * Processed file in 30.25 seconds
Extract content...OK
Processing File: nhl6_5105.46u
Boot... ASIC ID: 1120
Configuration Info (9F):
Number of Flashes: 2
ADR 01 : 00EC22F0 000000E4,SectorSize:10
ADR 02 : 00000001 00000000,SectorSize:00
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Erase[2.00 MB]...in 19.86s, Flash[1.08 MB]...in 7.63s
* * Processed file in 34.53 seconds
* * * Phone flashing done in 4:27 minutes
Pooling mode for profile update...
Sending Profile to Phone...OK
Miangee911
08-13-2008, 13:26
Buddies!
I have same problem.
If i connect any phone(i am using mt box nokia cables),and want to do any operation,it fails.
When i try to put phone in test /local/normal mode,it gives me Err nd nothing happens.
when i try to get fone info,box front leds blink couple of times and then goes off totally, and in window message appears,
"phone is not detected,power on phone".
What is wrong with my box?
I bought this box from Ipmart.
Are they selling fake boxes?or i am astrayed!
Miangee911
08-13-2008, 13:28
And also when i switch on the fone and retry,still same message comes back.
mohammed imran
08-20-2008, 11:31
open mt exe go extra option click automatic option while flashing click usetx2line and click disable vpp ok and reply post
rotelcam
08-20-2008, 12:15
Buddies!
I have same problem.
If i connect any phone(i am using mt box nokia cables),and want to do any operation,it fails.
When i try to put phone in test /local/normal mode,it gives me Err nd nothing happens.
when i try to get fone info,box front leds blink couple of times and then goes off totally, and in window message appears,
"phone is not detected,power on phone".
What is wrong with my box?
I bought this box from Ipmart.
Are they selling fake boxes?or i am astrayed!
And also when i switch on the fone and retry,still same message comes back.
Your pruduct is good. ipmart sells original pruduct. and there is no fake Mt box.
When even u want to use Mtbox, alway ensure that its the only device connected to the pc at that moment(the box is been readed as usb plug and play by ur pc). then cnnect fone to box b4 starting the software so for the fonr to be boot by power from the usb hurb when software connects to box.
Also, never try read info when fone is not in local or test mode. it cant be readed or any operation done. the lonly thing u can do when fone is blank is flash.
press power on botton for short or long to put fone in local or test mode.
Even if the fone powers on, no prob, just make read info and fone will go to test or local mode. Alway check ur cable positioning too since some are not well shaped to fit the space in fone interface. try move it little forward or backward.
Hope all these will help u. after some practice, u will be ok.;)
Br.
.ROTELCAM.
danishrehmanzai
08-30-2008, 10:13
Processing File: RM180_50706401.C0
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
%%%%%%%% ERROR BOOTING: