View Full Version : Astro-Clip versus P207 and X480
UnlockBR
10-24-2005, 14:59
How do I unlock these phones using Astro-Clip? Could not find them at Guide but at website the seem to be supported...
Regards,
Sergio
I think that X480 is a white phone the same as P207, check that the phones yellow, red or green are just special phones. Maybe x480 can be a green one but I doubt it:
1. Connect 9V battery to the clip.
2. Power OFF your phone.
3. Connect Phone to the clip via right cable.
4. Press shortly unlock button in the clip.
5. If led goes Red press power ON in your phone and hold it until led goes Green - If led goes Green just wait.
6. Wait until led will blinks a few times.
BR and post here if it worked well
UnlockBR
10-24-2005, 18:44
I think that X480 is a white phone the same as P207, check that the phones yellow, red or green are just special phones. Maybe x480 can be a green one but I doubt it:
1. Connect 9V battery to the clip.
2. Power OFF your phone.
3. Connect Phone to the clip via right cable.
4. Press shortly unlock button in the clip.
5. If led goes Red press power ON in your phone and hold it until led goes Green - If led goes Green just wait.
6. Wait until led will blinks a few times.
BR and post here if it worked well
Thanks for your reply...
X480 is the same as T100 cable. Tried and phone turned on just after conecting cable. Unlocked using another method (software) and selecting C200 as model.
Not sure what cable to use with P207.
Maybe V200??I'm not sure about this...because in Teleway website they claim that p207 it's a cable completly different...
BR
besthacker
10-24-2005, 20:48
x480 agere model same v200 cable
UnlockBR
10-24-2005, 21:03
x480 agere model same v200 cable
the same as T100 and others,,,, :-(
UnlockBR
10-25-2005, 23:40
still waiting for P207 info. My customer is getting angry... :( :( :(
UnlockBR
10-26-2005, 15:20
No news about P207 cable... Is it really supported?
P207 cable is Usb and you must buy it or home made. You can also use original Usb cable for D500.Then follow this procedure gived by AstroTeam:
Unlock solution for P207 Phone:
1. Install Samsung USB Driver
2. Run Update Software For Clip
3. Connect Clip to PC Via Update Cable.
4. Press unlock button in the clip (Untill led will go from Red to Green)
5. Click (Direct Unlocker)
6. Connect Phone to PC Via P207 Usb Cable.
7. Check In system , What is your Virtual Comport for your Samsung phone.
8. Choose this Comport Number in your Virtual Comport.
9. Click (Unlock P207) Button
Check that was not announced E760 it's now supported!!!
BR
Luskao[AstroTeam BetaTester]
UnlockBR
10-27-2005, 11:26
Ok, just saw... but things are not so clear to me...
D500 must be original or any USB-D500 cable will do?
My clip is updated (at least to the last file on support - just noticed siemens c62 installer are not there anymore).
I must connect clip using USB, Ok. And phone connected to USB to my PC too, correct? So... what software should I use?
Thanks for helping
D500 must be original, no china cables. If you want pinout for usb p207 I will find you. You must download new updater with support for unlocking from PC.
BR
AstroTeam
10-27-2005, 15:38
@sdantas:
Pinout for Samsung P207 original OEM cable can be found here http://pinouts.ru/data/samsung_p207_pinout.shtml
UnlockBR
10-27-2005, 16:01
Update was not avaiable when I posted ;)
Thanks.
AstroTeam
10-27-2005, 16:09
@sdantas:
Sorry, feel free to be corrected but Samsung P207 via original OEM cable was supported since we released an update for it (1st October).
But simply, we just forgot to add it's unlock procedure to the sticky guide.
UnlockBR
10-27-2005, 16:10
Hummm, where can I find/download this new updater with support for unlocking from PC.
BR,
AstroTeam
10-27-2005, 16:13
If you have updated your clip, just run the main Astro Clip executable and intialize the clip-mode and press ''Direct Unlocker'' and select your port and unlock your phone.
UnlockBR
10-27-2005, 16:17
@sdantas:
Sorry, feel free to be corrected but Samsung P207 via original OEM cable was supported since we released an update for it (1st October).
But simply, we just forgot to add it's unlock procedure to the sticky guide.
I thought that as this model was one of the reasons I decided to try your clip. Any way, I cannot find this "new updater with support for unlocking from PC."
My clip is with the newest version at support but I am relly having trouble with this particular phone.
With others I am having some trouble, but nothing that serious...
Thanks
UnlockBR
10-27-2005, 16:19
My mistake... I think I am getting blind :$
Well.can or not X480 be unlock by astroclip. which cable
He can't test it, he unlocked by other way.But we still waiting P207 answer...
BR
UnlockBR
10-31-2005, 01:43
I am still looking for an original D500 cable. Hope to get one tomorrow... Surely I will post results.... ;)
BR
Thanks Sdantas, I'm still giving as much information as possible to support for improve the product so I hope you will do the same
BR
UnlockBR
10-31-2005, 21:36
Got the D500 original cable (Samsung Data link Cable - model PCB113BSE - Made in Korea). But D500 CD drivers didn't worked...
UnlockBR
11-01-2005, 14:03
Please what may I be doing wrong? Today is my dead line or I will loose this service :(
Hoping AstroTeam will help you, try this and let me know if this worked...(You can search also...)
SAMSUNG P207 ONLY USB DRIVER & SOFWARE:
* Connect the phone before starting
* run the setup.exe in 'Samsung CDMA USB Driver'
o This will create a device called 'WMC ACM 1.0 app', but no drivers for it
* run the setup.exe in 'Samsung Mobile USB Driver'
o This will run a number of things. At then end it works
* Use the PIMS from the same website that had the drivers
The files are here:
CDMA (http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=HQ&CttFileID=545523&CDCttType=SW&ModelType=N&ModelName=SGH-Z500&VPath=SW/200508/20050804143823625_CDMA_Driver.exe)
or try this other one CDMA1 (http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=DE&CttFileID=573991&CDCttType=SW&ModelType=N&ModelName=SGH-P730&VPath=SW/200508/20050816150123140_USB_Driver.exe)
or the usb driver by Samsung here ( http://rapidshare.de/files/7050099/Samsung_USB_Driver.rar.html)
EndlessConnections
11-02-2005, 00:53
Hi ,
Sdantas
Please PM me , i can help u 100% with this problem , ok
Hasta Maniana
Amigo
Hoping AstroTeam will help you, try this and let me know if this worked...(You can search also...)
SAMSUNG P207 ONLY USB DRIVER & SOFWARE:
* Connect the phone before starting
* run the setup.exe in 'Samsung CDMA USB Driver'
o This will create a device called 'WMC ACM 1.0 app', but no drivers for it
* run the setup.exe in 'Samsung Mobile USB Driver'
o This will run a number of things. At then end it works
* Use the PIMS from the same website that had the drivers
The files are here:
CDMA (http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=HQ&CttFileID=545523&CDCttType=SW&ModelType=N&ModelName=SGH-Z500&VPath=SW/200508/20050804143823625_CDMA_Driver.exe)
or try this other one CDMA1 (http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=DE&CttFileID=573991&CDCttType=SW&ModelType=N&ModelName=SGH-P730&VPath=SW/200508/20050816150123140_USB_Driver.exe)
or the usb driver by Samsung here ( http://rapidshare.de/files/7050099/Samsung_USB_Driver.rar.html)
UnlockBR
11-03-2005, 04:00
Hoping AstroTeam will help you, try this and let me know if this worked...(You can search also...)
SAMSUNG P207 ONLY USB DRIVER & SOFWARE:
* Connect the phone before starting
* run the setup.exe in 'Samsung CDMA USB Driver'
o This will create a device called 'WMC ACM 1.0 app', but no drivers for it
* run the setup.exe in 'Samsung Mobile USB Driver'
o This will run a number of things. At then end it works
* Use the PIMS from the same website that had the drivers
The files are here:
CDMA (http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=HQ&CttFileID=545523&CDCttType=SW&ModelType=N&ModelName=SGH-Z500&VPath=SW/200508/20050804143823625_CDMA_Driver.exe)
or try this other one CDMA1 (http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=DE&CttFileID=573991&CDCttType=SW&ModelType=N&ModelName=SGH-P730&VPath=SW/200508/20050816150123140_USB_Driver.exe)
or the usb driver by Samsung here ( http://rapidshare.de/files/7050099/Samsung_USB_Driver.rar.html)
luskao,
It.... WORKED!! Finally!! Thank you very much ;)
I had to follow all your steps but now phone is unlocked and customer, besides my delay, is happy ;)
Thanks for EndlessConnections for offering help by phone... but Brazil is a bit far away :P
And thanks for AstroTeam, too. But please, next time a faster answer would be great! Your product is new so not too many users can help. I am not a beta tester, so I paid for it (to be one, at least I feel like one).
Best Regards,
Sergio
PS> Still waiting for SE and C62 guides ;) And updates of course :D
And X480. How are steps ?
witch cable ?
AstroTeam
11-04-2005, 23:11
@mlmr:
Have you tried E700 cable? You should be able to use white marked solution for Samsung X480.
You can find the user guide at sticky for more detailed information.
UnlockBR
11-05-2005, 02:11
And X480. How are steps ?
witch cable ?
As I stated at my 2nd or 3rd post in this thread and luskao already said, I unlocked X480 using another method.
Try to follow AstroTeam steps ;)
BR,
X 480 is OK at all.
1 conect 9v to clip
2 press unlock and hold (until led goes green and red again)
3 put cable agere on X480 powered off
4 X 480 will turn on, led will goes green and after 3 seg. X480 is unlocked
UnlockBR
11-08-2005, 17:54
X 480 is OK at all.
1 conect 9v to clip
2 press unlock and hold (until led goes green and red again)
3 put cable agere on X480 powered off
4 X 480 will turn on, led will goes green and after 3 seg. X480 is unlocked
Just did 2. Thanks. The 1st one took about 30 sec. The 2nd one was just like you said.
Thanks again