View Full Version : Report occured software bugs and userproblems here
AstroTeam
10-27-2005, 15:55
Report occured software bugs and problems here.
For more detailed help, we do need specificed details like error code, phone type, performed action(s).
Please note:
To prevent these bugs, or userproblems kindly post only subject related questions/reports.
Best regards,
AstroTeam
UnlockBR
11-16-2005, 14:39
X460 don't work.
I had made another post deleted by AstroTeam. They say it was at "wrong section". So pls, don't ask me any additional info, Everything was at original post.
EndlessConnections
11-17-2005, 04:37
Sir,
Did u follow instructions in the astro guide ? or did u upgrade ur firmware on the clip ?because i have tried x460 and it works!
I hope u solve ur problem , if u need help from me i can help u personally.
Br
Endlessconnections
X460 don't work.
I had made another post deleted by AstroTeam. They say it was at "wrong section". So pls, don't ask me any additional info, Everything was at original post.
UnlockBR
11-24-2005, 21:56
Just tried to unlock a E630 with E700/Sysol cable. Not working :(
AstroTeam
11-24-2005, 22:30
We will check this problem and notify you in short.
EndlessConnections
11-25-2005, 13:29
What Version is your Firmware on the CLip?
Just tried to unlock a E630 with E700/Sysol cable. Not working :(
UnlockBR
11-25-2005, 21:22
The last avaiable at support site. I always check this...
EndlessConnections
11-27-2005, 08:13
I will test it myself this phone .
Magic Claw
11-28-2005, 18:50
Astro Team,
I have problem to get Astro Clip to work. I downloaded Astro Updater and installed it. I tried "Read Clip info" and it just say:
1 - Clip is not connected
2 - Clip is not POWERED ON
3 - Update Cable Problem
UnlockBR
11-29-2005, 01:44
Astro Team,
I have problem to get Astro Clip to work. I downloaded Astro Updater and installed it. I tried "Read Clip info" and it just say:
1 - Clip is not connected
2 - Clip is not POWERED ON
3 - Update Cable Problem
Before trying to connect press unlock button and wait till light goes green. Hope this helps,
BR
UnlockBR
11-30-2005, 14:34
X495. Just tried to unlock one without success
SW Version: X495UVEF
HW Version: REV1.200
EndlessConnections
12-01-2005, 13:02
Hi,
I have Unlocked Many X495 , try the sysol cable and follow the procedure ,ok
Hope it helps.
Br
Endlessconnections
X495. Just tried to unlock one without success
SW Version: X495UVEF
HW Version: REV1.200
UnlockBR
12-01-2005, 14:17
I used sysol cable and followed instructions... unlocked this one I got using another method... next I will try again...
UnlockBR
12-02-2005, 13:35
Just tried to unlock a E630 with E700/Sysol cable. Not working :(
Just got another E630. Same problem. Led stays green but don't blink (indicating phone is unlocked). Waited about 5 minutes and nothing changes....
Really not working... :(
Endless I need some help please log in the msn
EndlessConnections
12-03-2005, 02:50
Hi,
contact me on pm , and i can help you on this one . ok
Just got another E630. Same problem. Led stays green but don't blink (indicating phone is unlocked). Waited about 5 minutes and nothing changes....
Really not working... :(
UnlockBR
12-03-2005, 14:06
Hi,
contact me on pm , and i can help you on this one . ok
Added you to my MSN. PM is too slow :P
E630 and E350 not possible, E350 only try one time E630 my costumer tried many times.
BR
Luskao
Also this user is still waiting for his account to be activated. His email is mostoles1@hotmail.com
BR
Luskao
This is more a request than a bug. Could be possible to add charge phone option to the software?My costumer tried to flash a V800 and failed due to low battery problem...I'm not asking for charge at the same time as flash :)
BR
Luskao
EndlessConnections
12-28-2005, 16:44
please Luskao Contact me ! Thank you
Hi Endless there have been many time without any news from you. Contact me...
One new problem. Unlocking E330 failed. I didn't tried it, my costumer did. Could be possible to add a software solution in case of clip fails, using the clip as usual and loading that comport as unique...
Thanks once again
Luskao
AstroTeam
01-25-2006, 20:03
Software solution is close to final release, if you have any newer type of Samsung phones or older, please contact me.
I have been provided for some units but simply it's not enough.
An variety of platforms supported & required:
Swift
Sysol
Agere
Qualcomm
Unfortantly.. Skyworks is not included ;)
UnlockBR
01-31-2006, 23:01
Problems with software using Astro Manager:
Astro SE
NEC Reloaded
Astro Sharp
They don't work... at least here. Already tried to reinstall everything. :(
BR,
UnlockBR
UnlockBR
02-03-2006, 00:11
Just tried to unlock another X460 and it failed...
Firmware version: X460UTDJ2
Hardware version: MP 1.102
Provider code: 72405
Provider: Claro, Brazil
BR,
AstroTeam
02-15-2006, 17:49
@UnlockBR:
That softwares will be separately extracted on the next setup/installer.
About your X460 unlocking error, I have never encountered such problem before.
Did you succed to unlock the phone by other software?
UnlockBR
02-15-2006, 20:27
@AstroTeam,
Yes, phone is unlocked. My customer could not wait... and I don't like to loose money ;) $)
boschnelson
03-03-2006, 18:19
I can`t unlock sony ericsson phones; it`s serch for the phone but never find it.
UnlockBR
03-09-2006, 15:00
Just tried to unlock a X495 without success. :(
(Tried a E720 too... took too long but phone is unlocked)