I've buy a greencard... :D
but now i have to cut it into the small SIM-card format!!!
How can I do??? :confused:
Thank's!! ;)
Now, that you have programmed your new Silver/Greencard with the SIM-EMU firmware, you can do the cutting part:
There are two ways how to cut your green/silver card into the small sim-card format.
1) The first and easiest way is to use the plastic border that came with your original sim-card. Place it on top of the Greencard and use a pen to mark the border. You can use a scissor to cut the greencard afterwards. Please check the quality of your scissors on a part of the greencard, that will be thrown away anyway first. This is just to make sure, that you will get a straight line. Also, you can leave a bit more plastic around your 'new' sim-card and finish it up afterwards when you try to insert it into a mobile phone.
http://flycont.com/lab/labmenu/simemu/simemu_cut/sim_cut1.jpg
2) The second way you could do that "cutting" part is by using the lengths provided by this second picture. Always compare it with your original card and make sure, you won't cut it the wrong way!!!!! (i.e. upside down or horizontal/vertical). Don't worry if you need to cut part of the metalic sim-pads. The CPU is very small and located in the center only.
http://flycont.com/lab/labmenu/simemu/simemu_cut/sim_inside3.jpg
Good luck and happy cloning.
Regards Ch@in
(All photos were 'borrowed' from a russian site ( www.flycont.com ) and found through Google Image service.... ) http://images.google.com/imgres?imgurl=http://flycont.com/lab/labmenu/simemu/simemu_cut/sim_inside3.jpg&imgrefurl=http://flycont.com/lab/labmenu/simemu/simemu_cut/body_simemu_cut.html
I will try the second...
Many Thank's!! ;)
mE mYself & i
11-06-2005, 22:54
this one can help :)
http://hrof.net/~aghla/000.jpg