Please help me again KoTsk

[rumburak]

I have M55 v11.
I need a big and good (working) digital clock in screensaver and keylock mode.
My gratitude for you!
Sorry for my english!
Cristi - Romania

P.S. Exist "Autoanswer" patch for v11 ? It work setting from menu (enable/disable) ?
Thank`s again !!!

[KoTsK]

!!! IMPORTANT !!!
:) firstly, pls discuss about patches here:
http://forum.gsmhosting.com/vbb/forumdisplay.php?f=337


for digital clock it was posted start from here:
http://forum.gsmhosting.com/vbb/showpost.php?p=577021&postcount=21

and for auto-answer ...

; M55V11: Auto Answer Incoming Call
; (c)SiNgle (p)kay

/*
Create a record by dictafone with 5 sec durations and save as "A:\Voice Memo\auto.vmo"

Open Menu -> Organizer -> Dictaphone -> short to "auto.vmo" -> Options -> turn off handsfree

During an incoming call, the phone will play the record for 5 sec and then do REJECT.
*/


00423C: FAA05E4A DA9F460B ;call routine
3BE6BE: E407,4507 8B09,8B09 ;change txtId "Buddist year" -> "Auto mode"
3BE6CA: 2903 5F05 ;show_MenuItem
#pragma enable old_equal_ff
7F0AFE: 8840
7F0B00: DA8CA88E
7F0B04: 4840
7F0B06: 2D0E
7F0B08: DA21F8F0
7F0B0C: E6FD7C02
7F0B10: E6FC2E0B
7F0B14: E01E
7F0B16: DA2CDA64
7F0B1A: 9840
7F0B1C: 98C0
7F0B1E: 98D0
7F0B20: FAA20E41
7F0B24: 9840
7F0B26: E6FC0109
7F0B2A: FAA28240
;-----------------------------------------------------
; here's the file name and folder to store the .vmo
; !! pls use latest version of V_KLay !!
7F0B2E: "A:\Voice memo\auto.vmo",00
;-----------------------------------------------------
7F0B46: DAA05E4A
7F0B4A: 8880
7F0B4C: D7400700
7F0B50: F2FCDE33
7F0B54: DA8CA88E
7F0B58: 4840
7F0B5A: 2D08
7F0B5C: 48C5 ;cmp r12, #5h <- playback duration (5sec)
7F0B5E: 3D06
7F0B60: E6FC3B00
7F0B64: DA2C0637
7F0B68: DA22CA0C
7F0B6C: 9880
7F0B6E: DB00
#pragma disable old_equal_ff
82407E: E6FC0109 FA9FFE0A

not tested yet! :)
maybe you need to turn on/off Buddist year (replaced with "Auto mode") in Menu->Setup->Clock.

[rumburak]

Thank you verry mutch KoTsK (and for :30987E: E7FE2000 FA50DA98 - it work fine) !
My problem is : i need big digiclock in screensaver mode (or "saving energy" mode) and i not find a working patch.
Thank you verry mutch again!

[rumburak]

; M55V11,V91: Provider -> Batt Voltage + Percent Level + Temperature
; © ACiD[mrp], avkiev, ZZToP
; format sample: 3,938=75% 25,3'C

0CB786: E04E00E066FEFF3FF2FF02FE E6FE2001E6FF0300DA500898
0CC390: E04E00E066FEFF3FF2FF02FE E6FE2001E6FF0300DA500898

#pragma enable old_equal_ff
309808: 88608870888088C0
309810: 88D0D7401100F2FC1C21F6FC0EFEE6FD6400
309822: 5BDDF2FC0EFEF2FD0CFEBB5FD7600300
309832: F7FE20C1E7FE2C00F7FE21C1F078
309840: F7FE22C1F0CDBB52D7600300F7FE23C1
309850: F078F7FE24C1E7FE3D00F7FE25C1D7401300
309862: F2FCEC27BB42D7700300F7FE26C1
309870: F078F7FE27C1E7FE2500F7FE28C1E7FE2000
30987E: E7FE2000 FA50DA98
309882: F7FE29C1D7401100F2FC1E61E6FDAA0A
309892: 20CDF6FC0EFEE0AD4BDDF2FC0EFE
3098A0: F2FD0CFEBB23D7600300F7FE2AC1F078
3098B0: F7FE2BC1E7FE2C00F7FE2CC1F0CDBB16
3098C0: F078D7700300F7FE2DC1E7FE2700F7FE2EC1
3098D2: E7FE4300F7FE2FC1E10EF7FE30C1
3098E0: 98D098C0988098709860DB00F6FC0EFE
3098F0: E0A65B66F2F70EFEF2F80CFE06F73000
309900: 06F83000CB00

I add line :30987E: E7FE2000 FA50DA98 and it work fine,but signal percent no work exactly(I consider!!!).It is posible remove "=00%" and display only batery voltage ?
Big thanks !

[rumburak]

Hi KoTsK !!!
I combine more patch and result 1 single patch for DigiClock V11 ;it work fine in keylock mode and screensaver mode.Thanks you !
It is posible remove "=00%" ?
My pnone display "Batery discharge...." to the value of 3,58V.I think it is not normal ? It is posible to set it to a lower value ?

Regards!