pedro_ady
11-23-2005, 15:46
for xp update scdr1 to jtag
Chawkiz_gsm
11-23-2005, 19:56
nice gift from you pedro because this resolv all problem with
dos program like many program found in usr soft ( for exemple alcatel program ) thx
The_Gorr
11-23-2005, 20:37
waiting for more easyest way to convert scdr1 to 2;)
BR
<= The_Gorr =>
waiting for more easyest way to convert scdr1 to 2;)
BR
<= The_Gorr =>
more easy way than this I think not exsist, I think you will waayt very long time!
The_Gorr
11-24-2005, 15:36
using windows Xp there is always problem updating dongle .........
BR
<= The_Gorr =>
more easy way than this I think not exsist, I think you will waayt very long time!
surfer2go
11-27-2005, 23:53
hi doesn´t work for me on xp sp2 always device is locked
C:\DONGLE~1>start.bat
C:\DONGLE~1>AllowIo.exe esupd.com
AllowIO for PortTalk V2.0
Copyright 2002 Craig Peacock
http://www.beyondlogic.org
Executing esupd.com with a ProcessID of 0
PortTalk Device Driver has set IOPM for ProcessID 0.
C:\DONGLE~1>esupd.com /e
Sagem Dongle Programmer 0.43
Write code and/or data : esupd <hex file> [<hex file>] ...
Verify code and/or data : esupd /v <hex file> [<hex file>] ...
Read code, data or fuse : esupd /r{p|e|f}
Write fuse byte : esupd /f{l|h|x}<hex>
Lock device : esupd /l[<hex>]
Chip erase : esupd /e
Copy calibration bytes : esupd /c ...
Specify port number [1] : esupd /p<n> ...
Specify I/O delay [3] : esupd /d<n> ...
SUPPORTED DEVICE:
AT90S 1200,2313,2323,2333,2343,4414,4433,4434,8515,8535
ATtiny 12,13,15,22,26,2313
ATmega 8,16,32,48,64,88,103,128,161,162,163,168,169,323,6 03,8515,8
ATTENTION:
This program is for DOS and Windows 95/98/Me,
do not use on any Windows NT/2k/XP.
Sagem Dongle Programmer 0.43
Device is not working or not supported device (FF,FF,FF).
C:\DONGLE~1>esupd.com ddd.hex
Sagem Dongle Programmer 0.43
Detected device is ATmega16.
Flash: Erasing...Writing...Verifying...Failed 0000:2F-FF
corachon
11-28-2005, 01:46
I have the same problem on XP-SP2 and finally tried on Win98 with success
ics_igrec_zet
11-28-2005, 11:52
It work only in win98 :D:D:D
BR, xyz
LordMen007
11-28-2005, 14:54
Nice job
but if any body tested or not
does anyone do the cystal change?
corachon
11-29-2005, 00:12
Nice job
but if any body tested or not
I unlock a MY-V55 with this update..........i have a 3.6 Mhz crystal