d500 flex cable clip

[coolmax]

dear sirs,many of us have changed the flex cables on samsung d500 e800 etc with no problems..most of the time but in very rare cases the the black clip used to hold the flex in place breaks or becomes disjointed due to accsessive force be used.does anyone have solution to fix this problem apart from changing the complete holder soldered to the board.
thanking u all.

[hitibiti]

yes we meeet this problem some time
but no place to find full connecteur for thsi model !!

[kham]

after put your flex insert an old flex to press

put a adhesive band

that all!!!

[kham]

or desold from lcd board

[Simzmobiles]

this is what yours are looking for just a shame about the price

http://cgi.ebay.co.uk/SAMSUNG-D500-MAIN-RIBBON-CONNECTOR-CLIP-FREE-P-P_W0QQitemZ5836779043QQcategoryZ42413QQrdZ1QQcmdZV iewItem

[hasnat]

Hay, I Have A D5oo Insert Sim Problim Ples Aney Body Help .i Trey To Program But 1 Bot Fail . Phon Power Is Ok.

[fanbang]

dear sirs,many of us have changed the flex cables on samsung d500 e800 etc with no problems..most of the time but in very rare cases the the black clip used to hold the flex in place breaks or becomes disjointed due to accsessive force be used.does anyone have solution to fix this problem apart from changing the complete holder soldered to the board.
thanking u all.
there is no need to replace the whole holder. just replace the black clip. today I repalced the black clip on d410 using a clip from E800. the clip can be fitted on to the original holder quite easily. my guess is that d500 properly use same size clip. clip can be bought around £3 to £5.

hope this helps.
br

[coolmax]

after put your flex insert an old flex to press
put a adhesive band
that all!!!
thanks kam for yr quote.but have you tried this method?and if you have wat was the outcome?did you have any sucess?

[coolmax]

this is what yours are looking for just a shame about the price
http://cgi.ebay.co.uk/SAMSUNG-D500-MAIN-RIBBON-CONNECTOR-CLIP-FREE-P-P_W0QQitemZ5836779043QQcategoryZ42413QQrdZ1QQcmdZV iewItem
cheers mate for the link.but the price is sky high as you said.have you tried to resolder this component back on the board with any sucess?
let us know the outcome. thanx

[bbmad]

there is no need to replace the whole holder. just replace the black clip. today I repalced the black clip on d410 using a clip from E800. the clip can be fitted on to the original holder quite easily. my guess is that d500 properly use same size clip. clip can be bought around £3 to £5.

hope this helps.
br

How do you remove the black clip on the Samsung D410 to be placed into E800? I don't want to break this clip as well; any instructions, links or pictures would be helpful.

Thanks

Majid
www.mobilekrazy.com

[fanbang]

1st of all, does D410 clip base still wanted. if not, you can break the sides of the base. then just slide the clip out. if this is your 1st time. memerise the clip ways before remove.
if you still want D410 clip base intact. then you have to be very gentle when remove the clip. start with 1 end and work towords the other. use a microscope if you have 1.
to fit on to e800. start with 1 end then the whole clip should just slot in easily. do not use any pressure.
in both events the clip must be in fully opened position.
hope this helped.
BTW
E800 and D410 clip don't fit D500. their are too small.
br

[bbmad]

1st of all, does D410 clip base still wanted. if not, you can break the sides of the base. then just slide the clip out. if this is your 1st time. memerise the clip ways before remove.
if you still want D410 clip base intact. then you have to be very gentle when remove the clip. start with 1 end and work towords the other. use a microscope if you have 1.
to fit on to e800. start with 1 end then the whole clip should just slot in easily. do not use any pressure.
in both events the clip must be in fully opened position.
hope this helped.
BTW
E800 and D410 clip don't fit D500. their are too small.
br

Thanks Mate i'll give it a bash!

Majid
www.mobilekrazy.com

[ajaydevgan]

merciiiiiiiii beacoubbbbbbb

je suis tres contant$

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

[bbmad]

1st of all, does D410 clip base still wanted. if not, you can break the sides of the base. then just slide the clip out. if this is your 1st time. memerise the clip ways before remove.
if you still want D410 clip base intact. then you have to be very gentle when remove the clip. start with 1 end and work towords the other. use a microscope if you have 1.
to fit on to e800. start with 1 end then the whole clip should just slot in easily. do not use any pressure.
in both events the clip must be in fully opened position.
hope this helped.
BTW
E800 and D410 clip don't fit D500. their are too small.
br

Which position does the black need to be in closed vertical or open horizontal?

Thanks

Majid
www.mobilekrazy.com (http://www.mobilekrazy.com)

[fanbang]

open position means when you open black clip to remove flex.

[farry]

no disrespect to fanbang,but i have replaced loads of black clips in closed position,the reason is i can c the little curved gold metalic holders better(only replaced under microscope)i start by liftting pins up(only little bit upwards,and only the curvey ones))then insert one end in,then with a needle i push the rest in little by little while at the same time pushing the clip inwards!at first when i use to replace these clips.it was easier for me to break ithem in 2 halves!!now when u finish pushing the clip in(be very gentle),bend the pins that u have pushed up,down to its original place,i must add that u only push them up,just a little so that u have enough clearance for the clip to go in!!also u can buy these clips from this supplier in uk www.excelldirect.com a bit pricy but good if u get stuck!! although i might try replacing one clip in on position.!!

[fanbang]

everyone has different ways which they feel comfortable with. with the clip open. there is no need to mess with any pins as those pins are so delicate. like i said, everyone has different ways.
br

[ZAHID MALIK]

loud speaker of my 6230 is notworking .any solution please.

[GSMsurgeon]

loud speaker of my 6230 is notworking .any solution please.

Hi,
r u blind? this is samsung hw repair area..u r post regarding nokia...pls go to nokia section

[evolutionmobile]

after put your flex insert an old flex to press

put a adhesive band

that all!!!

Excellent. Work 100%. Thank a lot. You're the best

[gsmxpert]

i wish i can get that cheap, cus i have many cases of bad clip:D