PDA

View Full Version : Nec E616v Big Problem Please HELP!!!

sy27
12-13-2005, 09:23
Ok a few days ago i succesfully unlocked my phone with crazzy 5 and a usb cable that i modded, so then i decided to Flash the firmware from SV 18 to SV24 with IPLS202i all was going well until my pc crashed half way through now my phone won't turn on i have tryed to reflash but it just times out.

Can someone offer me some advice or some other software i can try, before i get a serious "I TOLD YOU SO" off my wife:(

Thanks

SY
adihack
12-13-2005, 15:51
1) Get out battery from phone
2) Connect USB cable
3) Put battery to phone
4) Phone should be in test mode(A: and C: on extrernal display)
5) Now try to reflash phone ;)

Post result. You can't kill phone by IPLT flasher.
sy27
12-13-2005, 16:50
followed your instructions using IPLSD1_IT_099_05fa1_e616_H1.ifs
on the screen i get A: and C:
A: says Ver.02.01
then the Light flashes red and the screen says
MSG Err Wrt Adr Mx

then after a few minutes i get a very loud beep and this (see attachment)

and thats all it keeps doing,, is there anything else i can try
adihack
12-13-2005, 16:55
It seems that your phone is OK. Try to use diffrent flasher, maybe your flasher is wrong. In subject you have written that you have a problem with 616V. On screen I see flasher for e616 without "V" . There are two diffrent flashes !
sy27
12-13-2005, 17:09
that maybe the problem. thank you
could you (or anyone) give me a link or something for a differnt program, please don't tell me to use the search button because every link i follow is dead.

Thank again for your replies
cardex
12-13-2005, 17:39
that maybe the problem. thank you
could you (or anyone) give me a link or something for a differnt program, please don't tell me to use the search button because every link i follow is dead.

Thank again for your replies


Download from Rapidshare SW v24 , tested and works 100% ;)

http://rapidshare.de/files/9106380/ULTIMO_VGA__IPLT_for_USB_Ver.2.0.5_UK.rar.html


wbr
cardex
sy27
12-13-2005, 17:44
Thank you , i hope this works, i will let you know how i get on
ndagi
12-13-2005, 18:00
how about flashes? where to get flashes from?
thanks in advance
ndagi
sy27
12-13-2005, 18:45
it got to 93% hung then timed out,
does this happen or has something gone badly wrong?
cardex
12-13-2005, 19:04
it got to 93% hung then timed out,
does this happen or has something gone badly wrong?

Hmm , to be maybe then fault of your computer , taste on different
flasher is works 100% .
sy27
12-13-2005, 19:43
after 3 attempts, the phone is is now working great unlocked and upgraded from SV18 to SV24.

Many Thanks you guys and have a good christmas
cardex
12-13-2005, 19:54
That is all OK :)
NoName®
12-16-2005, 21:12
HeHeHe have anologic trouble with E616 w/o 'V' so what flash recommended to use ? ;-)
crooke07
12-12-2007, 06:31
Download from Rapidshare SW v24 , tested and works 100% ;)

http://rapidshare.de/files/9106380/ULTIMO_VGA__IPLT_for_USB_Ver.2.0.5_UK.rar.html


wbr
cardex



link not working

can u help my e616 freezes
can someone send me a link to the files to flash and the program to flash it OR
an email or link post thank you:)
swit_true
12-12-2007, 17:42
hi to all a have a problam plzzzzzzzzzzzz help me my NEC e616v eair peace not wark have same any body re solve my prob
muzahura
12-15-2007, 06:29
hi, nec pros, i have a nec e606. it doesnt detect/read simcard at all. what problem is it? hardware or software? thanks