View Full Version : 902sh Error 40343B can't flash
Kevbodian
01-06-2006, 10:40
I am trying to flash a 902sh.
I have tried:
v140 Euro v2
v101 Euro
V102 Chinese
Both euro i get error 40343B and on the Chinese I can only flash the first file.
Do any of the firmwares work for 902?
this phone is made in May 2005
Kevbodian
01-06-2006, 11:33
Euro files stop at 95% (Euro 101, 140v2; Error 40343B)
Chinese files (Chinese 102, 103) won't flash second file (Error 40343B)
also, phone is blinking. turn on: Please Wait... phone restarts and says Please Wait... phone restarts and says Please Wait... phone res........................etc
Kevbodian
01-06-2006, 11:38
wow... changed to v2.1.... seems like no problems.
Zuli, check this out.
edit: in initialize boot now.
i think it takes like 15 mins.... waiting.....
Kevbodian
01-06-2006, 11:47
all done. use v2.1 for 902sh!!!!
I am trying to flash a 902sh.
I have tried:
v140 Euro v2
v101 Euro
V102 Chinese
Both euro i get error 40343B and on the Chinese I can only flash the first file.
Do any of the firmwares work for 902?
this phone is made in May 2005
I think you use Sharp3G_Tool_v31, I have the same problem with this version. Now you must use Sharp3G_Tool_v30, all thing will be ok.
Zulea try to fix this problem.
Kevbodian
01-07-2006, 01:40
ya i used 3.1 and got problems. i used 2.1 and everything was ok. i will try 3.0 next week when i get a 902 and 802 in.
hey kev,
can you send me V2.1?
My email is rx_sevenAThotmail.com
Kevbodian
01-09-2006, 19:46
...... sent ........................................
Can you also send me 2.1 or 3.0 to daniel.huba@seznam.cz? Thx
peacenik
01-11-2006, 03:08
yeah. sharp3gv3.1 sucks. had the same problem yesterday. but with 3.0, everything went well.
Can you also send me 2.1 or 3.0 to daniel.huba@seznam.cz? Thx
You can download it on support site of Usb-smart.
superwing1248
01-11-2006, 03:41
You can download it on support site of Usb-smart.
not for the 3.0 and 2.1
not for the 3.0 and 2.1
Oh Yes...all of old version have been deleted by Zulea before the new version 3.1 was suppoted.
OH.
I just flash euro firmware into my chinese 902SH.
It happen the same problem.
It look like some bug in v3.1.
Kevbodian
01-11-2006, 09:13
3.1 only works with 903
3.0 and 2.1 will work with 902/802
Can someone send me or give link to ver 2.1 or 3.0 pls? Thx
3.1 only works with 903
3.0 and 2.1 will work with 902/802
It means, that when I will select like phone model 903SH and flash 902SH with flashes for 902SH, problem with error flashing will be solved?
Can someone send me or give link to ver 2.1 or 3.0 pls? Thx
Here : Sharp3G_Tool_v30 (http://s17.yousendit.com/d.aspx?id=3HXV2AC51ICEA22PXMJMKM4ZIF)
Thank you very much. If you will need something, you can contact me directly on ICQ.
Thank you very much. If you will need something, you can contact me directly on ICQ.
Oh!!!! thanks my friend, i'll contact you if i need your help
Hi all
I need it too, can anyone send me please?
Sharp3G_Tool_v30 or 2.1
I have usbsmart.
If anyone can upload to www.rapidshare.de i will apreciate
webmaster@rushwhq.com
Thanks and Regards
Rush
mutualmobile
02-18-2006, 03:19
3.1 doesn't work on 903 as well
Hi all
I need it too, can anyone send me please?
Sharp3G_Tool_v30 or 2.1
I have usbsmart.
If anyone can upload to www.rapidshare.de i will apreciate
webmaster@rushwhq.com
Thanks and Regards
Rush
I sended you an e-mail with the file, became you it?
3.1 doesn't work on 903 as well
I donīt know about 903sh, but with 902sh I had many problems on version 3.1, version 3.0 my problem solved. Thx to trieubk for sharing.
please send to me caribe4free@yahoo.com
Kevbodian
03-13-2006, 00:57
3.1 doesn't work on 903 as well
903 requires flash to unlockable firmware. v31 is the best tool for this purpose.
--edit--
direct unlock of 903 is not yet supported
please send it to me: huangjq12@163.com
Can someone send me or give link to ver 2.1 or 3.0 pls? Thx
tufivex@yahoo.com.tw
Can someone send me or give link to ver 2.1 or 3.0 pls? Thx
tufivex@yahoo.com.tw
Use v5.0, 902 flashing bug from v3.1 is corrected now.