6020 cnt file error

[gsmindia]

hi i received a 6020 for flashing i use original twister with original hwk.

after flashing with 6020 flash version 4.10 mcu+ppm the phone was on after couple of hours the phone again went dead.

after flashing again same flash combination the phone not on/local mode. so i do full erase and flash ver 4.1 mcu+ppm+cnt now still phone dead.

tried with ver 3.52 mcu+cnt+ppm, ver 3.92 mcu+cnt+ppm, ver 4.10 mcu+cnt+ppm still no good news phone stays dead.

then I use the 128 cnt file and other sol provided in the forum but get this error

1st Boot Ok, DCT4, UPP: 2142
Fl0: 0x01000000-0x01FFFFFF,00EC22F8,Sam K8S2815ET
Algorithm: u_amd.fia, Ver: 4.49.0
Algorithm Ok, MSID: 8451818598857251EAB17712A6
Decoded MSID: 8FA4BAE9-009567C0-A9000000
Encoded FAID: 4321ECB2-729A7E3F-ECF5E6DC
Area1: 0x01000000-0x0101FFFF Erased, Time: 00:01
Area2: 0x01020000-0x0185FFFF Erased, Time: 01:31
Area3: 0x01E60000-0x01FDFFFF Erased, Time: 00:16
MCU Flashing Completed, Time: 00:54
CNT File: rm30__04.10repair.image_s
Chip SECTOR_SIZE: 64k, File FAT_SECTOR_SIZE: 128k
Warning, Must be Used 64Kb Sector_Size CNT File
File: not Found
Error in CNT File Conversion or Selection
Process Failed, Repowering Mobile

pls help its urgent any help will be appreciated

b.r

gsmindia

[sources]

6020 new flash cnt. you use file cnt 128 or flash mcu, ppm without cnt.

[SixthSence]

hi i received a 6020 for flashing i use original twister with original hwk.
after flashing with 6020 flash version 4.10 mcu+ppm the phone was on after couple of hours the phone again went dead.
after flashing again same flash combination the phone not on/local mode. so i do full erase and flash ver 4.1 mcu+ppm+cnt now still phone dead.
tried with ver 3.52 mcu+cnt+ppm, ver 3.92 mcu+cnt+ppm, ver 4.10 mcu+cnt+ppm still no good news phone stays dead.
then I use the 128 cnt file and other sol provided in the forum but get this error
1st Boot Ok, DCT4, UPP: 2142
Fl0: 0x01000000-0x01FFFFFF,00EC22F8,Sam K8S2815ET
Algorithm: u_amd.fia, Ver: 4.49.0
Algorithm Ok, MSID: 8451818598857251EAB17712A6
Decoded MSID: 8FA4BAE9-009567C0-A9000000
Encoded FAID: 4321ECB2-729A7E3F-ECF5E6DC
Area1: 0x01000000-0x0101FFFF Erased, Time: 00:01
Area2: 0x01020000-0x0185FFFF Erased, Time: 01:31
Area3: 0x01E60000-0x01FDFFFF Erased, Time: 00:16
MCU Flashing Completed, Time: 00:54
CNT File: rm30__04.10repair.image_s
Chip SECTOR_SIZE: 64k, File FAT_SECTOR_SIZE: 128k
Warning, Must be Used 64Kb Sector_Size CNT File
File: not Found
Error in CNT File Conversion or Selection
Process Failed, Repowering Mobile
pls help its urgent any help will be appreciated
b.r
gsmindia

U CAN USE NORMAL CNT FILE CHECK & POST RESULT :p

[gsmindia]

1. normal cnt not working tried different versions 5 versions of cnt tried

2. 128 cnt not working as seen in the first post

3. flashing with only mcu + ppm not working

please give some better solution

b.r

gsmindia

[minda69]

minda@absolutok.net thanks

[gsmindia]

somebody out there pls post a solution.

b.r
gsmindia

[..::shah_suhag::..]

flash with
mcu: rm30__03.920
ppm: rm30__03.92a
cnt: rm30__03.92.image_a_128

100% working
b.r

[afra.com]

solution 100% woked. tested

[gsmindia]

@suhag

as mentioned throughou this post 128 cnt not working why dont u understand

b.r

gsmindia