View Full Version : FuriousBox with NEC 338
Whenever I use repair or unlock function, FuriousBox makes my monitor go blank and forces my system to re-boot without unlocking the phone.
Has anyone had this experience or understands why?
version 03
Driver loaded
correct port selected
Problem Solved by reinstalling software!
Well sometimes you may need little of patience and troubleshooting.:):)
Has anyone had this problem?
FuriousBox forces computer to re-boot while trying to unlock Nec338.
I am beginning to loose confidence in this FuriousBox:mad:
pearsonjohnboy
01-16-2006, 15:23
i have. i just power off my computer and start up again. make sure you check version of 338 before you try and unlock. if version 4 you will need to downgrade first if not for some reason if changes imei and kills the phone.
.:Kuku:.
01-16-2006, 22:45
Has anyone had this problem?
FuriousBox forces computer to re-boot while trying to unlock Nec338.
I am beginning to loose confidence in this FuriousBox:mad:
ahhhh
small proble
problem came from 2 reasons.
1st ur com(serial 1 .2 or any port )not working perperly and u select wrong port for unlocking.
2nd ur usb cable or mobile charging jack have some problem and cant give proper signal to pc .so software give u error & when u try to exit the programe pc was restart.
so make sure software read the mobile info correctly ?
and when mobile connected with pc ur mobile had blue screen ?
anyway what u want ?
if u want repair or unlock........no need to do repair etc with usb cable
;)
i give u short method
just use sharp gx30 com cable
connect cable with mobile & furious box.
no need to push any button from furious box.
connect the box with pc via com + usb .
open the software and chose (nec com )option.
power ur phone.....phone will be on.
select repair phone funtions .and do it.phone will be restart.
after again power on ur phone and select unlock phone.click do job.
phone will shows some informatoins that bad things happen :confused:
but dont read the info......ur phone will be unlocked......imei change to 0044
Thanks For The Sunny .The Chief Of MobileWala Team
WBR
Kuku
MobileWala Team (http://www.mobilewala.com/forum)
vhbindia
01-17-2006, 09:00
i have. i just power off my computer and start up again. make sure you check version of 338 before you try and unlock. if version 4 you will need to downgrade first if not for some reason if changes imei and kills the phone.
No need Downgrade V04 to 03 Just unlock with F2 Box
Enjoy...
Thx To Sunnyc
bhogpurmail
02-28-2007, 18:01
furious team ,wake up,& tell the modified cable circiut to unlock & procedure to unlock the nec338 by fbox2..................i have 7 pc. to unlock ......but no one response...am waiting ur reply
Irfangk786
02-28-2007, 21:13
furious team ,wake up,& tell the modified cable circiut to unlock & procedure to unlock the nec338 by fbox2..................i have 7 pc. to unlock ......but no one response...am waiting ur reply
Furiousteam is waked up.U must wake up & wash mouth and rub eyes Use GX30 com cable to unlock ur 7 pc.
bhogpurmail
03-03-2007, 17:00
irfanqk786 u wake up,ok,,i know it very well,,but gx30ip-fd cable don't work properly ok ,so i request here ,ok
Irfangk786
03-03-2007, 23:31
GX30 cable working for all but not for u.....! so u made ur own cable.lolz
electrolandgsm
03-04-2007, 13:16
irfanqk786 u wake up,ok,,i know it very well,,but gx30ip-fd cable don't work properly ok ,so i request here ,ok
use any other cable for sharp gx30 with rj45 from any other universal box...and will be all ok.
don't blame the box always..because u may have a damaged phone my friend...check also phone conector on pcb.
Irfangk786
03-08-2007, 21:27
electrolandgsm yah i agree with u.thay dont pay attention to themself and blame at products.
what about version 4 unlocking?
BR