Anyone got solution how to "Use Testpoin-Cable"

[Acer@Work]

Hi there,

Now i get my Dreambox... but now my question :

How to use the TP-Cable ??

Any Solution for this ?

Pictures may be helpful...

THX

[GSM Dream]

Hi there,
Now i get my Dreambox... but now my question :
How to use the TP-Cable ??
Any Solution for this ?
Pictures may be helpful...
THX

1) Download and instal Dreambox Service Software
2) Run dbss.exe
3) Select phone model
4) Open "General" tab
5) Open "[+] Test Point" section on information panel

There you will find pictures that show how to use test point cable. If there is no test point section for selected model, then test points are not required for this model. For E-Gold phones this section currently contains only "cut track" information.

P.S. Please read user manual before connecting and using dreambox. Manual is available for download at www.dreambox.hk -> [support]

[Acer@Work]

Hey GSM Dream ... thx 4 your answer.

But the Testpoint Pictures are NOT very useful ...
Like the Picture of S65 Testpoint...
The TP Cable got 3 Contacts. 2 Black (shortcut i think) and a red ? ...

I got to shortcut the TP to Ground ? and whats with the red one ? ... dont use ? use ? ... hmmm...

And how long i have to hold the TP connected ? all the time while updateing ? Must the batterie be in use while Updating ?

With my Smart-Clip the TP must be shortcuted with GND and only while Smart-Moto is searching the Phone ...
With Dreambox too ?

Thx Man.

[cataunl]

Hey GSM Dream ... thx 4 your answer.
But the Testpoint Pictures are NOT very useful ...
Like the Picture of S65 Testpoint...
The TP Cable got 3 Contacts. 2 Black (shortcut i think) and a red ? ...
I got to shortcut the TP to Ground ? and whats with the red one ? ... dont use ? use ? ... hmmm...
And how long i have to hold the TP connected ? all the time while updateing ? Must the batterie be in use while Updating ?
With my Smart-Clip the TP must be shortcuted with GND and only while Smart-Moto is searching the Phone ...
With Dreambox too ?
Thx Man.

man just leave us alone, and the forum also. u don`t know to do anything, just go do something else, but not unlocking phones. u have pictures man. tp is the one with button. read the manual. read the manual. the other one like tp but w/o button leave it. and the other one is +. that one comes to the battery + connector on the phone

[Acer@Work]

Thx. Thats what i wanna know ;)

And thx for tip to do something else ... i´m thinking about ... ;)

I´m noob in Siemens ... all other Brands like Nokia, Samsung, Sony-Ericsson are no Prob ... but Siemens ... z.z.z. ... thats why i bought a Dreambox.

and so ... I dont leave you alone ... man. Sorry. :D

But thx for info.

[F C]

Hi there,
Now i get my Dreambox... but now my question :
How to use the TP-Cable ??
Any Solution for this ?
Pictures may be helpful...
THX


LITTLE MORE EXPLANATION MAY BE HELPFUL FOR OTHERS.


=== FONE CABLE GOES INTO DATA RJ454 SLOT.

===SERVICE RJ45 SLOT IS FOR TP ADAPTOR.

===TP ADAPTOR WORKS ONLY IN THOSE CASES IN WHICH U NEED TO MAKE THE TEST POINT GROUND. USE THE BIG NEEDLE WITH A TICK TICK TOUCH BUTTON ON IT , WHEN SW ASKS TO POWER ON ATTACH THE NEEDLE TO THE TEST POINT AND PRESS THE TOUCH BUTTON , UR FONE WD BE RECOGNIZED BY THE SW .( IN TP ADAPTOR CASE FONE DOES NOT CONTAIN THE BATTERY)


==== IN CASES TEST POINT JPEG SHOWS U TO CUT THE TRACK , TP ADAPTOR WONT WORK , U NEED TO CUT THE TRACK THE MANUALLY TO MAKE THE FONE BOOT.



REGARDS
GOHAR !