Alcatel Exxx Cable for Logger

[simbirley]

I have seen lots of posts with the pinouts for this cable but is there anywhere you can buy the cable ready made without having to make any modification to it ?

If so where from and which cable ??

thanks

[afra.com]

see pinout and make it urself.
b.r

[simbirley]

Ive already seen the pinout, but i want to buy qty of 100 and im not going to make 100 cables myself.

[afra.com]

now red-box support all alcatel exxxx unlimited
u can buy and enjoy.
b.r

[simbirley]

Again that has nothing to do with my original post.
I want to buy the cables so I can resell to my customers. I dont want redbox and i dont want the pinout!!!

[mtony969]

Again that has nothing to do with my original post.
I want to buy the cables so I can resell to my customers. I dont want redbox and i dont want the pinout!!!
Teleway have them ready ;)

[cubafreak]

Where i need to connect pin 7 to have auto ignition?

[Medved3100]

Simon!! I Want My Money Back, Why Will You Not Respond To Any Emails?

You Are A Rogue Trader, All Buyers Be Aware!!

[jakrzys]

Cable from OT535 is not good?

[Multi-COM]

you must remake 535, cut plastic of it

[BouRRi_GSM]

4- Red
3- White
2- Green GND

cut plastic then invert RX & TX from 535 cable

pinout from s2gsm are like 535 & not working, because pinout in Fbus mode are inverted (look at your USPI: RJ45 pin 2 is Fbus RX (Red) & RJ45 pin 3 is Fbus TX (White)

you can compare from all standard pinout posted anyway :)


Eddhif Riadh _Tunisia

[youcef_gsm]

Very good solution

Thanks

[youcef_gsm]

OT535 isn't good ?
Mr Youcef

[soft@man]

hi alll
Cable of Alcatel Exxx i tessst is worck

[jakrzys]

hi alll
Cable of Alcatel Exxx i tessst is worck
Do you use external power? It's working for me with logger, but not with free soft :(

[BouRRi_GSM]

hi alll
Cable of Alcatel Exxx i tessst is worck

right Color, but invert RX & TX name (FBus) (in ur USPI look RX et TX in Fbus Mode), this for all standard pinout, u can compare ;)

[dynamic-gsm]

4- Red
3- White
2- Green GND
cut plastic then invert RX & TX from 535 cable
pinout from s2gsm are like 535 & not working, because pinout in Fbus mode are inverted (look at your USPI: RJ45 pin 2 is Fbus RX (Red) & RJ45 pin 3 is Fbus TX (White)
you can compare from all standard pinout posted anyway :)
Eddhif Riadh _Tunisia

tested and work 100/100 , yes Bourri, your pin-out is a good one ;)

br dynamic .

[Multi-COM]

if somone good many phones and need original connector (not remaked 535 or 715) let us know ;)

[coucoulido]

please give schematic cable RS 232

[^Hany008^]

48585
48586
vle5 by redbox , SwS_TOTAL_Alcatel_VLE5_COMMANDER

[Jerry1234]

I need the alcatel cables for the latest models, if there is someone who can sell it to me pliz.

[jamespond]

If you want to use free soft, must cut the testpoint.I tested this soft and pinouts and works fine.(After this, you must repair the testpoint!)

[kamanzi]

hello all.I have alcatel ot-e207 i want unlock it with polar box2.some one know pin out OT-Exxx of polar box 2?please help me

[Nadjombe]

The same pinout as old e205 did you have the cable?:D

[kamanzi]

yes i have it but if i want unlock with it it doesn't respond.polar box need cables OT-Exxx to unlock alcatel OT-E207.until now i didn't get solution for this alcatel

[sansari]

here is your request: