PDA

View Full Version : Eric stay powered up when I hold the "No" button pressed.

sat
08-21-2001, 18:57
when I release the button, it turns off. What could be a problem? I checked batt connection, checked keyboard tracks - everything ok. Phone almost new (1 week). Please help! it's common problem on many ericcson phones.
Bert
08-22-2001, 04:20
Hi<br />It seems flash data lost, you have to reflash it!good luck <img src="smile.gif" border="0">
sat
08-22-2001, 06:58
I tried to reflash also. when I release the no button, program gives me error "bad response". It's definitaly hardware problem. I thinks some resistor or capasitor or smth like that. please help!
themobileking
08-23-2001, 16:40
A transistor is faulty .i'll send you the exact location on 24/8/2001

regards<br />themobileking
sat
08-24-2001, 12:20
pls be quick, I must return it today. thanks a lot.
unlockphone
08-24-2001, 18:05
Can I have a copy too ?

Thanks in advance.
sat
08-25-2001, 08:30
I changed four transistors on backside of board with no result. pls help
sat
08-25-2001, 12:50
ok, thanks all who helped me, especially mobileking. I replaced a transistor with wrong one, it didn't work. THen I replaced with another working one and now phone is working... but can't find a network... What to replace now? PA, filter or something else? <img src="smile.gif" border="0"> )
brka1
08-25-2001, 13:48
i have same problem with 768<br />Sat can you help me??<br />which trans. is faulti<br />thx
sat
08-25-2001, 17:09
this transistor has 5 legs and located on opposite side of NO button (component side). good luck!