c35 no sound in the specker

[tone]

hi.<br />please i have c35 but no sound in specker.<br />please any one help me

tony

[gsm_boy]

Hello there...

Mail me Simple Track Missing here... I'll show u the Track Position... And try to arrange Pic of C35 so I show u Exact Position... if Anybody have Plz send me on gsm_boy@rediffmail.com.

Thanks

Good Luck

<img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <img src="smile.gif" border="0">

[gsnbhagawan]

back of the board thair is three box<br />1st network<br />2nd network+audio<br />3rd sys con & power

open third box & test speaker track continuti at left top of box two littel pf is thair put both end of speaker jumper wire to that pf

i tried that <br />worked ok

if any problem send layought or photo i'll point that pf

[platte]

I've tried your solution but it's not working for me.<br />Is there another solution?

[genocite]

u have to connecting both track, even it's just missing one track, connect both of it, try that

[platte]

I have connected the two speaker terminals to the two pf point underneath third box.<br />But it still won't work and speaker is good (tested in other phone)

[Pandemonio100]

Hi try this: near the CPU there is this chip UBGA PMB2906E (audio logic) resolder this chip but attention you can damage the phone whit hot air. <img src="wink.gif" border="0">

[kazak]

In most case , you can do this :<br />-hold the speaker facing to you.<br />-short-circuit the left contact of the speaker to direct ground (real GND) and leave the ohter contact.oL----Ro<br />-Patch the right contact on the pcb with scotch or anything to prevent the speaker to touch it again.<br />that's all

[themobileking]

Does the ear phone kit work with your phone ??is the audio OK?Probably yes!!

If yes ,the connect 2 jumpers from the charging socket(the extreme left pin and the one next to it)directly to the speaker.I've tried it many times and it works well for me.If the audio level is low change the original speared with a universal speaker.It will be perfect.

<br />Rgds,

themobileking <img src="cool.gif" border="0"> <img src="cool.gif" border="0">

[platte]

I have connect the two wires but still no speaker sound.<br />I gues i have to throw my c35i away.<br />Thanks for all the help <img src="confused.gif" border="0">

[Corban]

Have you tried to check the tracks with the ohmmetr first? May be you've connected theese wires vise versa? Because It has to work!!! And one else! May be you have the wet handsfree contacts on your phone port? If the icon of headset is on the screen - just clean your phone connector and dry it good

Best regards<br />Corban

[genocite]

it's just very simple, first try ur phone with handsfree, if the speaker works there, that means nothing error with your audio bga (PMB 2906), then the problems must be in broken link, have u connected a right link ? mail me and i'll send u the link diagram. there's no way the speaker can't function

[max8108]

Hi,<br /> Could someone please email me the diagram with where to connect as I have same problem.

Thanks<br />Max

[Moc]

Hi Genocite

Can you sand me the diagram to solve this problem ? Pls

e-mail : ejazmussa@hotmail.com

Rgds

[fego]

Hi!<br />I have same problem. Please send me the diagram to solve this problem.<br />Thx<br />fego@freemail.hu

[genocite]

okay, seems all have got the diagram, please post the result here

[kenichi]

There you got the image, thanks to EH and Landy.
http://eh.student.utwente.nl/%7Elandy/service_manuals/siemens/Siemens%20x35%20-%20repair%20connection%20speaker%20-%20by%20EH.jpg

[kenichi]

I have just test it and, of course, it works. Thanks.

[EGYGSM-TEAM]

Hi all
your diagram is here
user : mobile
pass : elibom
http://eh.student.utwente.nl/~landy/service_manuals/siemens/Siemens%20x35%20-%20repair%20connection%20speaker%20-%20by%20EH.jpg
goodluck
Wesam

[Hackrack]

I have same problem. No Sound. Even new Speakers Used.

The link given is not working.

Plz send me full detail with pic at Hackrack@gmail.com

Thanz!

[iko]

x35 no sound in specker-there is 2 solution