View Full Version : For Sst-team About This C72
georgegsmro
02-03-2006, 11:51
please say me what is that after flash c72?
Phone model changed to: C72
Please connect the needle to Test-point
Flash Chip : 0089880D (Intel)
Bootcore IMEI P
FIRMWARE PHONE MODEL: G77
FIRMWARE VERSION: 16
LANGUAGE GROUP: mg?
Please connect the needle to Test-point
Please connect the needle to Test-point
Starting Repairing Procedure ...
Flash Chip: 0089880D (Intel)
Bootcore IMEI: P
OTP IMEI: 35xxx3000484700
Writing Simlock ...
Phone Successfully Repaired
Please connect the needle to Test-point
Flash Chip : 0089880D (Intel)
Bootcore IMEI P
FIRMWARE PHONE MODEL: G77
FIRMWARE VERSION: 16
LANGUAGE GROUP: mg?
only sst dead my phone.
best regards
try with this flash
C72_fullrepair.rar (http://www.sst-gsm.com/support/Fullflash/SGOLD_PHONES/C72/C72_fullrepair.rar)
b.r.
georgegsmro
02-03-2006, 12:00
scuze me
best regards
wath problem from you phone?
sorry if i post wrong answer
georgegsmro
02-03-2006, 12:12
try now this flash and i tell you what is happent
try now this flash and i tell you what is happent
aha....:) :) sorry
hehheh
in you post i not se with flash file you flash phone....but ok...sorry
georgegsmro
02-03-2006, 12:29
nothing new
Nothing received after BOT-Block1
this is the response
please say me what is that after flash c72?
Phone model changed to: C72
Please connect the needle to Test-point
Flash Chip : 0089880D (Intel)
Bootcore IMEI P
FIRMWARE PHONE MODEL: G77
FIRMWARE VERSION: 16
LANGUAGE GROUP: mg?
Please connect the needle to Test-point
Please connect the needle to Test-point
Starting Repairing Procedure ...
Flash Chip: 0089880D (Intel)
Bootcore IMEI: P
OTP IMEI: 35xxx3000484700
Writing Simlock ...
Phone Successfully Repaired
Please connect the needle to Test-point
Flash Chip : 0089880D (Intel)
Bootcore IMEI P
FIRMWARE PHONE MODEL: G77
FIRMWARE VERSION: 16
LANGUAGE GROUP: mg?
only sst dead my phone.
best regards
Please use v6.86 until we release v7.01!
hitibiti
02-03-2006, 13:06
pleas fix unlock for C62 (V28) and add flash file in support section
nothing new
Nothing received after BOT-Block1
this is the response
first write block 000-002
georgegsmro
02-03-2006, 13:58
i put block 000-002 from another c72?
i put block 000-002 from another c72?
please use this file from C72_repair_00-02.rar (http://www.sst-gsm.com/support/Fullflash/SGOLD_PHONES/C72/C72_repair_00-02.rar) and alseo read the instructions from the txt file C72_repair_readme.txt (http://www.sst-gsm.com/support/Fullflash/SGOLD_PHONES/C72/C72_repair_readme.txt)
MOBICLASIC
02-03-2006, 18:31
I also have one dead C72 after unlocking and I downloaded this C72_repair_00-02.rar but when I try to write it stops at 3 % and it is not continuing.I am downloading now the full repair one will try if there are any diferences.One more,do I have to flash it first with swup as it is writen in text or just with the litle one and the full flash?