I NEED HELP WITH ALCATEL [Archive]

View Full Version : I NEED HELP WITH ALCATEL

themobileking

10-02-2001, 16:11

Dear Friends,

I have 4 alcatel be-1 handsets for repair.All 4 are dead.I've tried to flash and repair all of them but with no result.Andro 5.9 is able to connect and flash them but they refuse to switch on??<br />Somewhere in the forum I once read that there is also a hardware solution for this problem ,by bridging three legs of an ic.which one I've forgotten.<br />I need help.Any suggestions??

regards,

themobileking <img src="biggrin.gif" border="0">

ARC

10-03-2001, 21:11

Oaoaaaa!

Don't try hardware repair, if your units answered on adnromeda5.9

u have to flash them: (you have software problem)<br />find same FLASH (AMD->AMD) (FUJITSU->FUJITSU)<br />and 1MB->1MB and 2MB->2MB

reflash it, your phone should be swich on after write flash....

if u have backup rewrite it on it's unit and this time try SPLOCK first for all your dead BE1 , if it doesn't work so try full flashing......

Goodluck!

<img src="wink.gif" border="0">

themobileking

10-06-2001, 13:44

Thanx for the reply but i have already tried that any other suggestions???

MikeDawg

10-14-2001, 18:24

Use mihnea soft! And if that doesn't work short solder first 3 pins on the ptwl chip, and try with mihnea again.