View Full Version : M35 problems
Ok i've got a problem with my m35 from siemens. Monday it suddenly stopt working propperly. It received a SMS and i wanted to unlock my keypad but it didn't do anything. SO i took out my battery and put it back and turned the phone on. But the problem then was I can't type my PIN or do anything except taking the battery out again. Anybody any idea what i can be and if it is fixable by myself or that i've to send it back.<br />(for the dutch people, it is a phone from the Postbank action, and simlock is removed 2 or 3 weaks ago).
Hi zarch I had the same problem with my M35 from the postbank/Telfort action. I did not solve the problem because suddenly the phone works just fine again after 2/3 weeks. I know that this is a now problem with the C-M35 so there must be somebody that can help you!! I think you don't get any support from Postbank or Telfort. I can't help you here bud there is still hope.
Regards,<br />Fallen <img src="rolleyes.gif" border="0">
Try to flash phone with Full Flash (4MB)........then repair EEprom checksum with Ziemens,must work!
Hi there,<br />Do you think this will solve the problem of no reaction when i press my keyboard?
And maybe you can provide me with a link to the flash and programs?
(or maybe e-mail them to me (contact me than).
Thnx
Hi there...
There is no need to Reprogarm or Reflash...
Only reflow Some Air to CPU... That's all...
But b carefull while Reflow Air to CPU...Dont over heat it...
Best of Luck...
<img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <img src="smile.gif" border="0">
Quang Thao
10-07-2001, 18:33
Hi<br />You didn't need re flash fone or re sold mcu.<br />you just only open your fone and clean the keyboard (on main board not on rubber).it will work again.<br />good luck