PDA

View Full Version : T10 no charging after battery empty

iHi
10-19-2001, 12:30
Hi!

The phone works fine, the charging is also good, but when the battery is empty the phone doesn't charges this battery anymore. But with a new battery it works again.

Any idea? Please Help!

thx<br />iHi
sawa
10-19-2001, 21:48
bed battery..or..you have to check connection from pin 1 and the circuit beetwen batery connectors..and card connector..on board (it has an 6 legs)..you have to have a conections beetwen <img src="smile.gif" border="0"> )
gsm_boy
10-23-2001, 19:14
[quote]Originally posted by iHi:<br /><strong>Hi!

The phone works fine, the charging is also good, but when the battery is empty the phone doesn't charges this battery anymore. But with a new battery it works again.

Any idea? Please Help!

thx<br />iHi</strong><hr></blockquote>

Hello there...

Why dont u change the 6 leg small ic very near the Battrey Contacts on main pcb... The positive terminal goes direct to this IC... check it or Change it..

Yr problem will solved... if not solve then mail me with Pic of T20 i will show u the where is the Problem which i know.

Good luck..

<img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <img src="smile.gif" border="0">
duda
10-25-2001, 00:42
Hope this pictures will help you<br /> http://c:\t10.bmp
iHi
10-25-2001, 20:02
Hi!

duda can you send me in mail?<br />I cant see.

thx<br />iHi

att123@freemail.hu
MiSko21
10-31-2001, 23:26
Hi! I have had the same problem... just bridge the battery for a while (short circuit) .. it worked with mine! Bye!
duda
11-01-2001, 09:19
[quote]Originally posted by iHi:<br /><strong>Hi!

duda can you send me in mail?<br />I cant see.

thx<br />iHi

att123@freemail.hu</strong><hr></blockquote>

<br />Go to my site at<br /><a href="http://dudagsm.tripod.com" target="_blank">web page</a>and<br />you will find there the troubleshooting picture (on the right side of page)<br /> <img src="smile.gif" border="0">
Skyfox
11-02-2001, 00:27
You may have damaged the second line power ICs. In scematic it is N700, N701, N702. Usualy its have short to ground pin 4.
kenwood
11-02-2001, 16:54
hey duda you send money ha?but landy ıs not money<br />yes landys page freeeeeeee yaaaaaaaa!!!!!!!!!<br />landys page very good sıte a lot of program and a lot of servıce manual freeeeeeeeeeeeeee!!!!!<br />landy ıs a good man you are????

good work duda