PDA

View Full Version : T28 low volume on Mic


FSC
11-06-2001, 12:54
When I use my T28 mic the other people hear me very bad, the mic as a really low volume, I'm trying to fix this phone after is fall in the water. <br />The battery as been replaced and all is ok aparently (already update version) but the mic as a realy low volume. <br />Could it be only the mic that needs to be replaced or do I have to replace some other components??

I don't have many experience in repairs and I need to know if the phone as any chance.

nnarta
11-06-2001, 20:41
Hi!<br />Mic 100%. You can test the cover from another phone...

FSC
11-07-2001, 17:28
I tested the phone with one "hands free kit" and thi Mic is also very low. So the problem is really not the Mic from the Phone. <br />Can someone give me some help how to fix the problem in the phone board (what components should I change) please...thanks

nnarta
11-07-2001, 18:21
Anyway, try with cover from another phone. If result will be the same, try to rehot lower chip...

Weller
11-12-2001, 22:43
Of course check the lines on PCB. If there is no any other solution try to clean PCB with alcohol and dry it with hot air.<br />Good luck

GsmSolution
11-13-2001, 06:23
Hi,<br />Try to reflow the MMA ic(multi mode adapter) or DSP ic.Or change the ic.<br />I think is your mic problem or external connector problem better change it.<br />enjoys. <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="tongue.gif" border="0"> <img src="tongue.gif" border="0"> <img src="tongue.gif" border="0">

FSC
11-19-2001, 15:45
Problem solved. I've changed the Mic and now its 100% <img src="smile.gif" border="0"> <img src="smile.gif" border="0"> Thanks everyone for the help...

Best Regards