PDA

View Full Version : Free Software For VLE5 without Test Point HERE !!

flechazo
02-11-2006, 13:17
Hi

for all member The soft for VLE5 without Test Point Is Now FOR FREE :D

ReGards .. Faisal:D
flechazo
02-11-2006, 13:18
And Voila :)

........ !!!
gsmmanager
02-11-2006, 13:21
please chek win rar


br
gsmsupport.net
02-11-2006, 13:27
Direct link (1 part file) :
www.gsmsupport.org/vle.rar
Poland GSM
02-11-2006, 13:43
thx good job
B.R.

Zbyszek
FreeLock
02-11-2006, 13:52
Thanks!! i'll try it
fahd-gsm
02-11-2006, 13:52
Thanx links it work good job;)
GsmSolution2008
02-11-2006, 14:04
this is old soft with testpoint :)
the new
02-11-2006, 14:21
work work work it work without test point !!!!!!!!!!!!!
I tested it now ;)
fahd-gsm
02-11-2006, 14:23
yes it working without test point;)
MOBICLASIC
02-11-2006, 14:26
Work work it work without test point thanks tested
SHIHAB
02-11-2006, 14:54
THANKS Poster

I.V.G
ardagul
02-11-2006, 16:33
what is the problem with e159
PowerON...
Connecting...
TimeOut...
End.

cable is rx tx gnd is enought or not?
pls upload correct pin out here

br
DOUHAL
02-11-2006, 16:57
tested and Worcking ' WITHOUT TEST POINT ' - But support only OT E15x NOT E25x E16x .

- Till this moment the Best Solution for Unlocking + Repairing is This VIDEO (http://www.douhal.com/Users/Alcatel_Clip.wmv)

Nice Regards / DOUHAL
fahd-gsm
02-11-2006, 17:05
No tested on all verssion;)
ardagul
02-11-2006, 17:18
finally I read code with out test point and this rx tx gnd but rs232 volt 3.8
PowerON...
Connecting...
Loading...
Reading...
Calculating...
NCK: 1205753352
Reset Code: 1324533937
and this pinout


regards to all
LordMen007
02-11-2006, 17:25
OK thinx Mr poster & the pinout like Th3 that all
http://www.gsmegypt.com/support/www.no4denmark.com/7.gif

Best regards
Lordmen007
moldovan
02-11-2006, 17:40
Anyone detected TROIAN programm inside ?
WBR!
the new
02-11-2006, 17:45
tested and Worcking ' WITHOUT TEST POINT ' - But support only OT E15x NOT E25x E16x .
- Till this moment the Best Solution for Unlocking + Repairing is This VIDEO (http://www.douhal.com/Users/Alcatel_Clip.wmv)
Nice Regards / DOUHAL
tested in E25x and it work :D
the new
02-11-2006, 17:48
finally I read code with out test point and this rx tx gnd but rs232 volt 3.8
PowerON...
Connecting...
Loading...
Reading...
Calculating...
NCK: 1205753352
Reset Code: 1324533937
and this pinout
regards to all
U are Mr ardagul
the Sagem Master ?????:rolleyes:
SALNAI
02-11-2006, 17:57
and U Mr The New ,
the first user of Free Software For VLE5 without Test Point ???:)
Hahhhhaaaaaa

best regards and good luck from saLnAi
DOUHAL
02-11-2006, 18:01
tested in E25x and it work :D

the name of software : pOT15Xfree_by_cable if it work with E25X ... that's good ;)
claudio_gsm
02-11-2006, 18:05
No tested on all verssion;)

If u are talking about "Clip Solution", i tested on all version and models... ;)!

BesT RegardS... from Spain :cool:
MOBICLASIC
02-11-2006, 18:07
Test e25x unlock working .
the new
02-11-2006, 18:19
the name of software : pOT15Xfree_by_cable if it work with E25X ... that's good ;)
it work with e15x and e16x and e25x ,I think because this phone have same architecture or similer :D
DJiCE
02-11-2006, 18:59
Tested on E159 i can't make it work... Pinouts are OK but software doesn't read the phone :(
.::Gsmdenis::.
02-11-2006, 19:04
nice for sharing those here, i wanna the test result here, hope got more info

BR.,

Denis
jignesh_1000
02-11-2006, 19:16
can any have pinout of com cable

and which models support
flechazo
02-11-2006, 19:21
this is old soft with testpoint :)

Is Old :D what the New Do U have , try this Solucion after that tell m if is Working 100% without test point or Not :o

ReGards.. Faisal:D
fahd-gsm
02-11-2006, 19:25
If u are talking about "Clip Solution", i tested on all version and models... ;)!

BesT RegardS... from Spain :cool:
I am talking about free solution:confused:
Siemens man
02-11-2006, 19:32
hi guys
please tell me. this is free soft can unlock all e1xx and e2xx phones without TP??? tell me
thank you
.:Morpheus:.
02-11-2006, 19:34
this soft work fine and posted Frist in Yegi forum The new huh you're very happy ;) ( Now VLE5 Unlocked with 1euro sure :o )
bestregards,
arczi68159658
02-11-2006, 19:50
It doesn't work with E159 :(

Regards
Siemens man
02-11-2006, 19:50
hi guys
tell me wich cabel is correct, tell me working pin out
thank you
BouRRi_GSM
02-11-2006, 21:32
here is correct cable
zied-gsm
02-11-2006, 22:58
yes i agree with morpheus................now unlock this models for 1euros;)
and everybody is happy with this!!!!!!!!!!!!!

i really don t understand......WE ARE THE UNIK JOB WHEN PEOPLE ARE HAPPY TO LOOSE MONEY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

and THE BUISNESS GO DON T AN ANOTHER TIME!!!!!!!!!!!:confused:


ziedgsm
BouRRi_GSM
02-12-2006, 00:12
http://www.s2gsm.com/ote-xxx-cable.htm:cool: :cool:

this pinout is wrong, but some people don't know difference between RX et TX, & try inverse these & test.

Look pinout posted by me
SM4RTBOY
02-12-2006, 07:05
tested and workzzzzzzzzzz...
br
sm4rtboy
flechazo
02-12-2006, 16:34
tested yester works 1000%. use XP :)
also whats the purpose of this reset code?

when the phone is blocked need to enter reset code after the phone ask for NCK

ReGards .. Faisal:D
gsm3005
02-12-2006, 17:17
block parentally call Operator messager on vle5

phone on orange uk and even not work on orange is well when sim inside it not let me to put reset code . not nck either with other network........ ###847# reset factory but same anyway ....to deal with it .blcok parmentally call oprator............ ???????
BLIDA
02-12-2006, 17:22
soft working 100% thanks for SPEAR GIFT now thread closed only spam (thanks .good work ...).