makona
11-23-2001, 04:05
Hi All ..
i have a common problem with the alcatel BE1 phones.
first, the phone might get dead sure with one of two reasons.. one of them is hardware and the other is software.<br />the software problem is easy to solve . (just flash the phone with the correct flash).<br />the hardware problem is strange sometimes .. anyway about 70% of the hardware problem is from one reason which i want to know more info about it.
i will give you all my informations about this problem :<br />i can know if the phone is dead due to this hardware problem by using the AVO meter.<br />when i measure the resestance between the most righet and the most left pin in the battery connector as following ..<br /> <br /> (anntenna is up)<br /> <br /> (- Black Avo Connector)---| |||| |---(+ Red AVO connector)<br /> battery connector<br /> i get two measures : <br /> 1. about 5 K ohm and in this case the phone is dead due to a software or any other hardware problem.<br /> 2. about 500 ohm in this case the phone dead due to this problem which is the most hardware problem i think (in this case the phone will not be read with any alcatel software such as Andromeda service software).<br /> i try to solve this problem by short circuit pin 2-3 in the IC (01D9RET-PTWL2207A) after this phone come to live again ... but sometimes it might get off and this is my peoblem ...<br /> <br /> can any body help me to really solve this problem ????? !!!
and thanx for help<br /> Meshoz
i have a common problem with the alcatel BE1 phones.
first, the phone might get dead sure with one of two reasons.. one of them is hardware and the other is software.<br />the software problem is easy to solve . (just flash the phone with the correct flash).<br />the hardware problem is strange sometimes .. anyway about 70% of the hardware problem is from one reason which i want to know more info about it.
i will give you all my informations about this problem :<br />i can know if the phone is dead due to this hardware problem by using the AVO meter.<br />when i measure the resestance between the most righet and the most left pin in the battery connector as following ..<br /> <br /> (anntenna is up)<br /> <br /> (- Black Avo Connector)---| |||| |---(+ Red AVO connector)<br /> battery connector<br /> i get two measures : <br /> 1. about 5 K ohm and in this case the phone is dead due to a software or any other hardware problem.<br /> 2. about 500 ohm in this case the phone dead due to this problem which is the most hardware problem i think (in this case the phone will not be read with any alcatel software such as Andromeda service software).<br /> i try to solve this problem by short circuit pin 2-3 in the IC (01D9RET-PTWL2207A) after this phone come to live again ... but sometimes it might get off and this is my peoblem ...<br /> <br /> can any body help me to really solve this problem ????? !!!
and thanx for help<br /> Meshoz