View Full Version : replace PA in the siemens C35 / M35
dghersin
12-14-2001, 08:26
Hi, please can someone tell me how to do it? I have the PA (Philips BGY270) and the phone with the "!" so I wanna repair it. I also have the hot air gun. So, where to start, I never made this.
THX Daniel
hello m8
i think bgy270 will not work , u need pf08112 & ant way if u want resolder the bgy u must be carefull not to melt its upper sheild its made of tiny plastic .
kind regards .
I need advice too ,how to change PA in C35 and how to remove old i have hot air.<br />Thank you. <img src="rolleyes.gif" border="0">
genocite
12-21-2001, 18:36
u must calibrate ur air and hot degree first, don't so fast in the air, cause u will **** all the other tiny part around it, and don't too hot, cause u will damage the pcb, **** at the pcb around the pa (not directly to the pa) and if u think it has ready, lift it up with a clipper (one more time, be careful not to mess the other part around it), apply solder to the new pa, apply flux to the pcb and put new pa in it's position, **** it again until it sink
Thak you men,you help me to remove PA on C35<br />Keep good work.Five Star from me.<br />RGDS<br />UnlockMan. <img src="biggrin.gif" border="0">