C35 Switches off after pressing the menu button

[themobileking]

The moment I press the menu button +any other button the phone switches off.I flashed the phone but still same problem.Any ideas???

rgds<br />themobileking <img src="cool.gif" border="0">

[Pandemonio100]

Ceck if your phone is water damaged or for bad battery contact. <img src="wink.gif" border="0">

[themobileking]

Its a brand new set.There is no water logging at all.

[s3nt4]

Yes...it could be bad battery.<br />It's usually happen.<br />Try use your battery on other C/M/S 35 phone to make sure battery condition.

-------------------------------<br />I need C/M/S 35 Flash v23 & v25 pls...<br />s3nt4@yahoo.com

[themobileking]

The battery is perfectly ok.

I have changed it.

<img src="cool.gif" border="0"> <img src="cool.gif" border="0"> <img src="cool.gif" border="0">

[genocite]

open ur phone, seems u got a bad contact at the back pcb, where there must be a contact for volume and voice recording button in S35i, that button contact also exist in C35i, even it's not used, a bad contact at that area will cause phone switch off when u push menu + any button

[j2000]

Hiii.<br />Just try to rehot DIALOG and CPU..sometimes u must add flux...around the IC <img src="wink.gif" border="0"> <br />TRY IT...

[evicsson]

Hi too you all.

If you want to resolder anything.. ..and i think that's where it's al about if you reheat a component. USE FLUX AND ALWAYS USE FLUX.

The tin in the mobile is a non flux type. that contents no flux from his self. So is you want to let it flow again en make it like new. Use flux. Check your local hardware store for the right one.

I always use flux from:<br />Alpha metals inc. Lot no:00010881<br />It's WriteFlux Cleanline nr205.<br />It does'nt need cleaning because you can put it exactly on the right spot because it's in a waterproofmarker style packing.

Have good luck. (an no i don't have stocks in alpa metals inc. <img src="smile.gif" border="0"> )

I use a Pace Hot AIRJET. On a Pace microbenchtop unit. (GOOD STUFF)