PDA

View Full Version : All MOTOROLA Hardware repaire


waleed2
02-18-2006, 16:18
Dear All Friends Here All Of Us We Will Write Our Problem And With Togather Will Found Solutions

waleed2
02-18-2006, 16:21
My First Problem Is When I Goto Camera It Hanges So What Can I Do

waleed2
02-18-2006, 16:27
This Problem In In V3 Razar

waleed2
02-19-2006, 15:38
no body replay why. problem sloved just change new camera and will work .

Mohamadmohamad
12-16-2006, 20:03
you kan reset the phone or flasch it , you d'ont specifie the model,

Mohamadmohamad
12-16-2006, 20:10
please help whit a motorola v525 d'ont laiting on displye bat wel in touch, thankyou

niflas
12-19-2006, 08:09
mot v525 keypad dsable,soluton plez

kendevil
12-19-2006, 10:47
i have a v3i insert sim.....can u help me sir......thanks

gsmstroong
02-20-2007, 22:15
i have a v3i insert sim.....can u help me sir......thanks

Hi brother.

your problem is (U900-AUL) chang this chip.

your mater it will be ok check schematics.

best regards

GSM STROONG:)

jaffar_ahamed
02-24-2007, 07:27
hi i got an problem in c-168 i charges but battery is not charging when any fully charged is used it shows battery low pls help me have a nice day to all

rajtelecom
02-24-2007, 13:43
E378i no charging

--------------------------------------------------------------------------------

hello any one have idea if put in charger then velu at battry conector only 1.25

gr8_carlos
02-24-2007, 13:47
i have motorola e398 don`t work keyboard and joystick. :(

Aymen G
02-24-2007, 13:52
V980 with low network !
any solution ?

AMINOS
02-24-2007, 13:53
clean your keyboard
Br

micgregelectron
02-28-2007, 22:40
hi , ihave problem with my L6 motorola every thing is working without screen how i can fix it anyone has picture how to repair .

shahi
03-01-2007, 10:12
moto c 200 mic not working . want mic ways. it's urgent.

shahi

gsmxpert
03-02-2007, 22:39
V980 with low network !
any solution ?

jumper the jack for external antenna connector:D or check ur pa

gilsie
03-05-2007, 08:54
Goodmorning bro,for your v525,remove the nap and reinforce its contacts with you soldering rod.
Take care

gilsie
03-05-2007, 09:00
Ahamed you odd to be explicit in you demand.what type or series of phone are you tolking of?

maxpizza
03-05-2007, 16:43
Hello everybody...I try to short pin 13-14 on my cable for recover dead T720i after upgrading...and windows shows up to me this window "New Hardware: Flash P2k Patriot".
I look around on the internet and i can't find the drivers...can anyone help me please????

Sadeeq
03-05-2007, 18:59
hi i have v3 nodisplay, flex & lcd ok, can you help me please.

lamine
03-09-2007, 14:16
Hi brother.

your problem is (U900-AUL) chang this chip.

your mater it will be ok check schematics.

best regards

GSM STROONG:)
please help me guy i'm loocking for motorola l6 imposible carge and camera solution the camera takes but no image help me and thank u.

Suntec
03-20-2007, 21:18
My First Problem Is When I Goto Camera It Hanges So What Can I Do

I have a v3i here. When i go to camara mode, the phone hangs there. I have change a new camara and flexi cable but still not working. I have try flash it but no use. Please help!:confused:

Suntec
03-20-2007, 21:20
V3i LCD no backlights. LCD is good. Please provide schemetic. Thanks!

tarunshan
03-22-2007, 04:56
v3-water damage. After cleaning with IPO & proper application of heat on the PCB, all function working fine.But prob is- when batt is inserted keypad lights on and u900 heated up very quickly. what is the possible remady PLS

Electrocina
03-22-2007, 15:17
please help me guy i'm loocking for motorola l6 imposible carge and camera solution the camera takes but no image help me and thank u.

the problem might from IC(chips), but most possibly, it is from itself( camera), why not change the camera completely?
:)
best regards

tdnetwork
04-06-2007, 07:32
hi, i got L& dead i work on the panel but it not still working pls help me.................

tdnetwork
04-06-2007, 07:47
hi, i got L7 dead i work on the panel but it not still working pls help me.................

Electrocina
04-07-2007, 17:50
hi, i got L7 dead i work on the panel but it not still working pls help me.................

the phone is dead, it might be caused by software and hardware. for hardware, there are problems from all parts, especially LCD, flex, IC, etc.

:)

thair
04-09-2007, 21:35
i have v220 insert sim pls help

nikill
04-11-2007, 11:17
i have a c168 in which the problem is , everytime it says battery low but the battery is ok as it is working on another mobile ,
after charging the set for many hours it does not shows full charging and when we take the charger out it again says battery low ..

nikill
04-11-2007, 11:19
is there any solution 4 it plz bro

gsm9l
04-18-2007, 23:05
Motorola v3 , blutooth not working any idea ?

Rony_Ony
09-23-2007, 19:57
hi i need to help motorola l7 insert simcard.anybody help me its argent..............

Pterachean
10-01-2007, 20:47
i have motorola e398 don`t work keyboard and joystick. :(

just change scroller

quindaro459
10-02-2007, 04:59
Need to know how to revive V557 board. Tried to unlock no only powers on for a second then off.

shameema
05-26-2008, 17:41
Hello Sir:
I Am Mobile Tecnition Compani ( Britce & Bridco )
Problel Motorola C168i Blangh Display All Componente Chengin Butt Not Ok
Whay
Can Halpe Mi Sir:

mahade
05-28-2008, 06:48
hi , ihave problem with my L6 motorola every thing is working without screen how i can fix it anyone has picture how to repair .
iamahasan i habu halp

goher_ali
07-12-2008, 21:41
[B][COLOR="DarkRed"]hi , i have problem with my L6 motorola every thing is working but There is No Display & No Lights On screen. how i can fix it anyone has picture how to repair..??

sheik india
07-16-2008, 12:34
moto l7 boot loader testpoint i want sir plz

mannu66
07-16-2008, 12:44
l6 show invalid batt

wilberulises
01-02-2009, 20:06
well my friends, my problem is that the microphone of my rizr z3 does not work at all, who knows how to replace it? because it is very different from others

honest.global
01-03-2009, 18:37
sir change the camera 1ooo%,honest.global

venkzzz
01-08-2009, 14:50
any body who can solve moto rocker mic not working... replaced mic then too same .

ndugwaez
01-09-2009, 14:38
can you assist me with insert simcard tis phone had been dropped in water;)

JumperKing
07-08-2009, 09:07
i have a v3i insert sim.....can u help me sir......thanks


try reheat this one, a mild heat.thanks hope it can help.


http://i303.photobucket.com/albums/nn121/joy_sky/V3i_V3r_V3x_No_Pwr.jpg

JumperKing
07-08-2009, 09:11
l6 show invalid batt



try to change new and working battery.

ranjabwoy
07-28-2009, 16:21
i also have the same problem how do solve the display of l6