C35 empty batt. problem.

[divji]

Hi,<br />I have problem on c35. When phone is switched on batt. bar is full and in stand by no problems. When you try make a call phone beeps dispaly empty batt. and switch off.

Can someone help me with this problem.

Thank's<br />Divji

[sat]

change PA. 200%

[divji]

Hi Sat.<br />I think PA is o.k., because on charger I can make calls without problem. If you have same problem and if you solve it with PA please replay my post.

Regards<br />Divji

[sat]

PA is consuming much more power if it's faulty. That's why your phone switches off when calling. When you charge your phone, you feed it from charger.<br />I solved many C/M/S 35, with such a problem just by replacing PA.<br />trust me, and all will be ok <img src="smile.gif" border="0">

[themobileking]

Its the pa 100%<br /> <img src="cool.gif" border="0"> <img src="cool.gif" border="0"> <img src="cool.gif" border="0"> <img src="cool.gif" border="0"> <img src="cool.gif" border="0"> <img src="cool.gif" border="0">

[genocite]

anyone know how to repair this kind of pa ? cause the pa can work for the signal, it only consuming more power.

[sat]

they are non repairable, so must be replaced. They have cracks underneath, if you look to it with a microscope.

[Chuk]

Check this thing:<br />Power up phone without SIM card and make SOS call. If phone works good and no beeps or power down, then it's software problem. You need rewrite eeprom and make CEE repair with Workshop.<br />(All known solution for dead phones)

[genocite]

how about not working signal for pa, like some that are not functioning in 900 but work in 1800 or reversely, could it be repaired, cause i've tons of this damaged pa, and it's pretty hard to find a good quality pa in my place