View Full Version : Siemens C35 not Logging to Net
Hello!<br />I have a proplem.<br />C35 not loggig to net. Only try it, but in start of operatrs name wrote symbol "!", and of course not calling (112 not calling too).<br />How to solve this?
PS May be it is EPROM bug...
The same problem with me.
It's not soft. it's hardware bug.<br />1. Check external antenna connector. Without ext. antenna in and out must be short.<br />2. If ok, then change PF08112B.
Good luck
It's not software, it's hardware bug.
1. Ckeck external antenna connector. Without ext. anenna [in] and [out] must be short.<br />2. If ok, then replace PF08112B.
Good Luck.
I think it is not hardware problem.<br />Because Name of Operator Appiar, but with symbol "!" in the start.<br />Also net indicator flashing and show the same as in the normal phone.<br />But can't connect Net and wrote "Can't register in network"
Still need some ideas.... <img src="confused.gif" border="0">
I had the same problem. Send me a letter and I will try to help you... You can write Russian, it will be better...<br />WBR, Serge
Hardware, hardware. Tested. Name of operator under (!), but sometimes without. First call and (!) again.
genocite
01-21-2002, 18:06
absolutely hardware problem, 80 % PA, and the rest 20 % just share it between other part like : antenna switch, TX filter, GAIM and maybe a little percent in CPU
Quang Thao
01-22-2002, 17:27
Yes<br />genocite is righ <br />this is 1000% problem of hard ware you try to replace PA.<br />brgds
gsnbhagawan
01-29-2002, 09:37
hi genocite <br />where is the Tx filter And GAIM located<br />need help<br />regardes
genocite
01-29-2002, 14:10
Tx filter is either marked Y37 or Y68, i don't very remember, but it's located in the pa box, just look for a large componen with a tin cover (looks like pa but smaller), GAIM is Pmb 2906, located up the cpu.
Good luck
gsnbhagawan
01-31-2002, 08:53
thanks<br />i will test and post result