Motorola v8088 "Phone failed See Supplier"

[fm-gsm]

Hi<br />Please, i have a Motorola v8088 "Phone failed See Supplier"<br />regards

[nab]

it has failed on of its primary checksums.

you will need to full flex it using an emmi box

[ranger]

hello<br />if u have test card ..e-mail me ..and i will tell u the solution to repaire it <br />best regard <br />rengo

[Bert]

Hello <br />There are three ways to repair the phone fail problem for Motorola phones<br />1. use transfer card press 21# to clone the good data from a working phone with same version and upload it by 03# to the defective one.

2. use test card after your phone enter the test mode press 0201# you will see some parameter<br />like 64 or something else just remeber it the press 0201xxx your phone's problem will be cleared <img src="smile.gif" border="0">

3. Just flex it acturaly you don't need to flash it in the common case <img src="smile.gif" border="0">

That's all good luck!

[Hanukkah]

If you have test card enter 0205# and get the output code. If it is 3 digits then just enter 0205xxx (where xxx is the 3 digits output). If it is only 2 digits output prefix it with 0. Hoep this helps.

[Sonia]

Just open test menu and try 57# (recalculating of eeprom cheksum). But be careful, because some phones like T2288 don't switches on after this operation.

Regards...<br />Sonia.

[Sonia]

Sorry - 57# is full reset with recalculating...

Best wishes.

[Williamcwy]

Another way is ...... change Flash IC, but btr you try test-card fist... <img src="biggrin.gif" border="0">

[hanoon]

test card method 100% working and tested...but somtimes after removing PHONE FAILD ,,,,, u need to SP unlock ur phone.....thanks for all ,,,,really good advice....

[vandal]

thanks is working keep it up mates