View Full Version : V360 Charge Problem
Wriwolff
02-25-2006, 10:44
Hello
This phone works fine but doesnt charge, i have been playing soldering some ways but i am not able to find correct ones. I am asking you for a good scheme or some idea.
P.S: This is a tsunami gift. everything have gone :D
I am also looking for v360 not charging solution after v360 TP unlock:(
Wriwolff
02-28-2006, 09:09
here is some help I will try later
Wriwolff
02-28-2006, 09:25
SOLVED:
shorted 2-3 and 3-5
and phone chargin again, will test more functions in phone
Hello mate thanks for your help I will test now.
I am just a little confused about which points are what as the numbers are not so close to each point could you please draw a line on the point that I should link.
Thanks in advance!
Wriwolff
02-28-2006, 12:56
i writted a wrong number before, its 5 not 6 (edited)
also here are lines
but i think it will not charge 100% properly (indicator, stop charging, etc)
Ok thanks.
Do you have pic of other side of PCB as I think my problem may be a missing suface mount resistor or similar as I also had no mic working after unlock but found that a tiny suface mount resistor has been ripped off I replaced with similar and mic working again. But now the charge problem.
BouRRi_GSM
03-03-2006, 02:46
i writted a wrong number before, its 5 not 6 (edited)
also here are lines
but i think it will not charge 100% properly (indicator, stop charging, etc)
u are right, soluce can't be completed by shorted wires (carhe control problem), but maybe battery can charge after few minutes.
better is to replace damaged IC :)
look pic
Do you know the reference of component labeled as Q903 = Q905 = Q906 ?
It would be possible to buy this component?
Thanks!
xpressmoviles
09-11-2006, 11:35
russian shops have this regulators, in spain conventional shops can't get it, i reserved this component on a electronic shop from Madrid but too long time come here.:mad:
but you can get it from scrap on v550, v980, v3, L6, only 4 solders, it's easy to get and change. important: see the orientation component ;)
zullu2004
09-14-2006, 10:25
thx for post.
really helpt :D
bebiloku
12-16-2006, 15:55
unable to charge after that
ANY SOLUTION
guedes666
03-16-2007, 12:57
unable to charge after that
ANY SOLUTION
Yes correct, after this solution the phone doesn't charge.
Someone have another solution for this?
sunnyarora
05-29-2007, 09:18
Please Give Me The V360 Charging Ways Help Me Sir
John(LMT)
06-25-2007, 08:03
Good solution for charge v360 work very well to me.
Regards....
John(LMT)
.:MESSAD_RA:.
07-16-2007, 23:16
any another picture to resolve this probleme please
for me good solution too.. thanks :)